What is the difference between DRYLOK and Drylok extreme?
The main difference is that Drylok Extreme has better water resistance than Drylok Original (15 PSI as opposed to 10 PSI). Drylok Extreme is wind resistant, includes biocide, and has a longer warranty. Additionally, the Extreme has a smooth texture, while Drylok Original offers a sandy texture.
How much does a 5 gallon of DRYLOK cover?
375-500 Sq. Ft
Passes ASTM D-7088 Resistance to Hydrostatic Pressure an ASTM D-6904 Resistance to Wind Driven Rain. 5 gallon can. Coverage 375-500 Sq. Ft.
How many square feet does a gallon of Drylok extreme cover?
Both DRYLOK® Original Masonry Waterproofer and DRYLOK® Extreme Masonry Waterproofer cover 75 – 100 square feet per gallon, and DRYLOK® Floor & Wall Masonry Waterproofer covers 90 – 100 square feet per gallon, depending on the porosity of the surface.
How many sq ft does a 5 gallon bucket of DRYLOK cover?
5 gal. container waterproofs 500 to 600 sq. ft.
Does DRYLOK extreme really work?
For maximum protection, I opted for DRYLOK Extreme. Recommended for the most demanding conditions and capable of resisting the hydrostatic pressure equivalent to a 33-foot-tall wall of water, DRYLOK Extreme does what other, broadly similar products do, only better.
How many coats of DRYLOK do I need for basement walls?
APPLY TWO COATS. Allow to dry 2 hours between coats. The second and subsequent coats may be applied by roller, brush, or spray.
How long does it take for DRYLOK extreme to cure?
DRYLOK® Original Masonry Waterproofer can be used to successfully waterproof fish ponds as long as the product is allowed to cure for the recommended 5 – 7 days. This cure time is necessary to ensure that all the volatile “processing aids” have completely evaporated from the dry film.
Can you use DRYLOK EXTREME over old paint?
Yes and no. DRYLOK® may be used over any other cementitious-type waterproofing paint in good, repaintable condition, either inside or outside. However, DRYLOK® cannot be used over an oil or latex-based paint on the inside of a building.
What kills black mold?
For a natural solution for getting rid of black mold, combine one part baking soda with five parts distilled white vinegar and five parts water in a spray bottle. Alternatively, you can use a chemical-based mold and mildew remover, all-purpose cleaners, bleach or dish soap.
How long does it take for Drylok extreme to dry?
2 hours
DRY TIME: 2 hours • To recoat: 3 hours Note: Maximum cure and dry time will be prolonged when slightly humid and damp, cool conditions prevail. CLEAN UP: Warm soapy water Dispose of contaminated absorbent, container and unused contents in accordance with local, state and federal regulations.
Can I put DRYLOK over old paint?
How long does it take for DRYLOK extreme to dry?