How do I resize a board in Altium?

Solution Details

Table of Contents

from top menu, View ► Board Planning Mode (or simply hit ‘1’ for the keyboard shortcut)
from top menu, Design ► Edit Board Shape (or simply hit ‘d’ twice for the keyboard shortcut) (see note below)
left-click and drag white edit handles, which appear as you hover over a board edge.

How do you calculate PCB board size?

In most PCB software, the size of a line can be determined simply by left-clicking on the line. The size of the line appears in a bar above the layout. Multiply the sizes of a horizontal and vertical line of the box together to get the size of the board.

How do I change the grid size in Altium?

Fig. By default, Altium Designer has preconfigured snap grids with 1mm, 2.5mm and 5mm grid spacing, which can be switched in any editor by pressing the G hotkey button at any time.

How do you change from mil to mm in Altium?

Solution Details To make these and other settings changes while editing a schematic library, Go to Tools ► Document Options which will open the Properties panel where you can change from mils to mm and check the box to Show Comment/Designator.

How do you measure PCB in Altium?

This command can be accessed from the PCB Editor and the PCB Library Editor, by:

Choosing the Reports » Measure Distance command from the main menus.
Using the Ctrl+M keyboard shortcut.

What is standard PCB panel size?

The typical PCB manufacturer runs a standard panel size of his choice, very commonly 18 × 24 in. They will want a 1/2-in. perimeter clearance for handling the panels when processing double-sided boards and a 1-in. clearance when processing multilayer PCBs.

What is panel size in PCB?

The most common standard panel sizes are 18” × 24”, 18” × 12”, 9” × 24”, and 9” × 12”. A ½” clearance around the panel border is required for handling panels, although some manufacturers will extend this required clearance out to 1” for multilayer boards.

How do I change the PCB grid in Altium?

Click the Grids button in the Board Options dialog (Design » Board Options). Select View » Grids » Grid Manager from the toolbar. From the right-click menu for the workspace (in Snap Grid sub-menu). Right-click in the PCB Editor and select Options » Grid Manager from the context menu.

How do I change the snap grid in Altium?

The dialog can be accessed from both the PCB Editor and PCB Library Editor in the following ways:

Click View » Grids » Set Global Snap Grid from the main menus.
Use the Shift+Ctrl+G keyboard shortcut.

What units are mils?

A “mil” is a unit of thickness equal to one thousandth of an inch (. 001 inch). To convert mil to inches, take mil and divide by 1000. Example: 2 mil/1000 = .002 inches.

What is mil in Altium?

Another thing that we should mention is that instead of “Metric” and “Imperial,” Altium Designer now refers to units of measurement as “MM” (Millimeters) or “Mils” units.

How does Altium define board shape?

Select the objects (the Edit » Select » All on Layer command is ideal for this). Run the Design » Board Shape » Define from selected objects command – the board shape will be redefined to the selected objects and the display updated.

How does Altium define board size?

Now you are ready to change PCB board size of the existing board outline in your design session. To do this, you will use the Design > Edit Board Shape pulldown menu command. Once you are in this command you will see the editing handles around the board outline.

How does Altium measure dimensions?

Access. This command can be accessed from the PCB Editor and the PCB Library Editor, by: Choosing the Reports » Measure Distance command from the main menus. Using the Ctrl+M keyboard shortcut.

How big can you make a PCB?

The largest panel size available is 22.5” X 54”, which can be fabricated for 2-layer boards. Bittele can fabricate 4-Layer boards with a maximum size of 21.5” X 53”. One important point that needs to be made is the additional fabrication cost that will occur with PCBs that have sides longer than 20”.

What are standard PCB sizes?

Today, boards are made to be larger and smaller than this standard, but the standard probably remains the most common thickness for designs. Today, it is more accurate to say there is a range of common or standard PCB thicknesses. These include 0.031in (0.78mm ), 0.062in (1.57mm) and 0.093in (2.36mm).

What is panel in PCB?

A “Customer PCB Panel”, or simply a “PCB Panel” is the panel that is utilized by a Contract Manufacturer (CM) for PCB assembly, meaning, populating a PCB with SMD or PTH components and thus creating a “PCBA” (“A” stands for Assembly).

How do I make grids visible in Altium?

This command can be accessed from the Schematic Editor, and Schematic Library Editor, by:

Choosing the View » Grids » Toggle Visible Grid command, from the main menus.
Choosing the Toggle Visible Grid command, on the Grids drop-down ( ) of the Utilities toolbar.
Using the Shift+Ctrl+G keyboard shortcut.

How do you add a grid in Altium?

Click the Grids button in the Board Options dialog (Design » Board Options). Select View » Grids » Grid Manager from the toolbar….Access

Use the Grids command on the menu associated to the Snap button, at the bottom-right of the main design window.
Use the G,M shortcuts.
Select Tools » Grid Manager from the toolbar.

What is snap grid Altium?

The Snap Grid dialog allows you to quickly set a different interval size for the Snap Grid. The Snap Grid pulls the cursor to the nearest point on its defined grid. Depending on how the dialog is accessed, the required value can be applied to both Step X and Step Y, or only Step X, or only Step Y.

How do I turn off Snap to Grid in Altium?

The active snap grid is displayed on the Status bar, and in the PCB editor Heads Up display (Shift+H to toggle on/off).

Which is thicker 6 mil or 4 mil?

The bigger the number of mils, the thicker the plastic sheeting. Here are some approximations with common items to help you understand. Four (4) mil plastic sheeting is about as thick as a piece of paper. Six (6) mil plastic sheeting is what your trashbags are made from in your kitchen.

How thick is 60 mils?

Visit our page for our plastic broken down by thickness.

mil	mm	inch
15	0.381	0.015
20	0.508	0.02
30	0.762	0.03 1/32 in.
60	1.524	0.06 1/16 in