How much does a cat 140m motor grader weigh?
41868 lbs
Weights
| Gross Vehicle Weight – Base – Front Axle | 9561 lbs (4,337 kg) |
|---|---|
| Gross Vehicle Weight – Typically Equipped – Front Axle | 11716 lbs (5,314 kg) |
| Gross Vehicle Weight – Typically Equipped – Total | 41868 lbs (18,991 kg) |
| Operating Weight – Typically Equipped | 41868 lbs (18,991 kg) |
How much does a cat 12 motor grader weigh?
Operating Specifications
| Articulation Angle – Left/Right | 20 ° |
|---|---|
| Max Operation Weight – Front Axle | 15284 lbs (6,933 kg) |
| Max Operation Weight – Rear Axle | 29406 lbs (13,339 kg) |
| Max Operation Weight – Total | 44690 lbs (20,271 kg) |
| Operating Weight | 32016 lbs (14,522 kg) |
How long is a 24M grader?
46.57 ft in
Caterpillar 24M Motor Grader Specifications: » Overall Length: 46.57 ft in. » Width Over Tires: 14.04 ft in. » Wheelbase: 33.72 ft in.
How much does a CAT motor grader cost?
New Motor Grader Average Costs # Full-size motor graders start at about $200,000.
How long is a road grader?
It’s usually 12 or 14 feet in length and consists of a cutting edge attached to the bottom and end bits on the sides. The moldboard is located between the front and rear axle. It can be rotated 360 degrees in either direction, allowing the operator to save time through a technique called reverse grading.
How much fuel does a CAT D11 burn per hour?
(24.7 L) of diesel an hour when operating under moderate conditions. Fuel consumption of larger dozers like the D11 can be five times that much. Medium-sized graders push and shove and burn their way through 6 or 8 gal. (23 to 30 L) of diesel each hour, with larger graders consuming several times more than that.
How much fuel does a wheel loader use per hour?
A medium wheel loader, says Caterpillar, typically consumes less than a gallon per hour when idling. On the other hand, a 369-horsepower 980K working steadily (no idle time) in a difficult application (such as the load-and-carry cited earlier) might burn more than 12 gallons per hour.
How much power can a C12 make?
The Caterpillar C12 truck engine delivers up to 445 horsepower and 1,650 lb-ft. Some C12’s make 425hp and 1,550 lb-ft of torque, and other applications may make less. The modern C12 marine power system delivers 340-490 horsepower.
Are C12 Cat engines good?
C-12 is a good motor. Expect to do a head gasket and Cam/Followers between 750 and 1 million. These problems are common, ask around and you’ll find out. Other than that, a good engine, the fixes are out so you will really only have to do them once.
How heavy is a 24M grader?
65,840 kg
At a Glance
| Base Power | Net: 399.0 kg/mm |
|---|---|
| Operating Weight | 65,840 kg |
| Blade Width | 7.3 m |
How do you calculate fuel burn per hour?
Pen and Paper Method
- Formula To Estimate Maximum Engine Fuel Consumption. Gallon Per Hour (GPH) = (specific fuel consumption x HP)/Fuel Specific Weight.
- 300-hp Diesel Engine Example. GPH = (0.4 x 300)/ 7.2 = 105/7.2 = 16.6 GPH.
- 300-hp Gasoline Engine Example.
- Other Related Resources:
How much horsepower can you get out of a Caterpillar C12?
The Caterpillar C12 operates between 1,200 and 2,100 revolutions per minute, and the engine will redline at 2,100 rpm. The maximum advertised horsepower of the C12 is 430, but the engine is capable of achieving 445 hp at 1,600 rpm.