What do I do if my Motorola says no command?
From the “No Command” screen (Android figure lying on his back), press and hold the Power/lock key then press and release the Volume Up button to display the menu options. Select “wipe data/factory reset”. Note: Use the Volume key to highlight and the Power key to select. Select Yes — delete all user data.
How do I factory reset my Moto G without command?
From the No Command screen, press and hold the Power/Lock button then press and release the Volume Up button to display menu options. 4. Press the Volume down button to highlight Wipe data/factory reset then press the Power/Lock button.
What does no command mean in recovery mode?
What Does No Command Mean on Android. Sometimes, when you reboot your phone into recovery mode, you see a message that says no command. This usually happens when your phone expects a command from you but it has not received any commands. More often than not, this issue occurs due to a failed resetting of the device.
How do I get my Motorola into recovery mode?
Press and hold the Volume Down button and the Power button at the same time until the phone turns on. Press the Volume Down button until you see Recovery mode. Press the Power button to restart in Recovery mode.
How do I fix my phone when it says no command?
To fix the annoying “No command” error on Android, use the Power button to restart your phone. Then boot into Recovery Mode, and wipe the cache partition to clear temporary OS and app files. If the issue persists, reset your device to factory settings.
How do I unfreeze my Motorola phone?
How do I force the Moto Z to reboot or restart when screen is frozen or locked up?
- Connect your device to the supplied charger.
- To reboot the device, press and hold the Power key for 10 – 20 seconds.
- If this reboot is not succesful, press and hold the volume down & power key together for 30-40 seconds.
How do I fix my Motorola phone stuck on boot and reboot?
Press and hold both the “Power” and “Volume Down” buttons. Do this for about 20 seconds or until the device restarts again. This will often clear the memory, and cause the device to start normally.
How do I reboot my Motorola Moto G?
Turn off the phone. Press and hold the Volume Down button and the Power button at the same time until the phone turns on. Press the Volume Down button until you see Recovery mode. Press the Power button to restart in Recovery mode.
How do I force restart my Motorola?
In the unlikely event that your device becomes unresponsive, try a force reboot. Warning: Don’t attempt to remove or replace the battery yourself —doing so may damage the battery and could cause burning and injury. To reboot the device, press and hold the Power key for 10 – 20 seconds.
How do I soft reset my Moto G?
Preferred Method
- Press and hold the. Power button. until the Power off option appears then release. If the device is unresponsive/frozen, press and hold the. Power button.
- Tap. Power off. .
- Once the device is powered off, press and hold the. Power button. until the moto logo appears then release.
How do I force restart my Motorola phone?
What does no command mean on a phone?
Android “no command” error usually shows up when you try to access the recovery mode or while installing a new software update. In most cases, your phone is just waiting for a command to access recovery options.
How do you unfreeze a moto g phone?
“If your device is unresponsive, frozen, or the screen is blank/black, press and hold down the Power button for 15-20 seconds to restart it.” Unlike most other phones on the market, Motorola only asks that owners press and hold the Power button for about 20 seconds, rather than multiple buttons at the same time.
Why does my Android phone say no command?
Here are some reasons behind “No Command” error in Android – It happens when Super User Access has been denied. When you try to reset your smartphone, it may cause this error. Sometimes system glitch during OS software updates may cause this error.
What does “no command error no command” mean?
In most cases, no command error isn’t actually a problem but rather a feature of the phone. Before entering recovery mode, your phone is simply waiting for a command and you can use the right key combination to access recovery mode.
How do I get rid of Android no command message?
1 Press “Power” key to back home screen. 2 Press Volume Up and Down buttons to scroll options. 3 Now tap 3 horizontal lines on the left repeatedly until it works. 4 When the process completes, you can reboot your phone by selecting “Reboot system now” and the android no command message will disappear.
What is no command screen and why it appeared?
Part 1: What is No Command Screen and Why It appeared? You might see a resting Android robot icon with its back or an exclamation point in a triangle icon that says “No Command” when you are trying to boot your Android into recovery mode sometimes. Most of the time, resetting the Android device is easier and users can finish it without any problem.