What is a flush bolt on a door?
A flush bolt is mounted flush with the edge of the inactive leaf in a pair. This device secures the inactive door to the frame at the head and/or floor.
Where on a door are flush bolts typically installed?
Flush bolts are installed into the lock stile on the inactive leaf of a pair of doors. There are often two bolts, one installed at the top and one at the bottom of the door. The strike of the top bolt will be in the head of the frame and the strike for the bottom bolt will be in the floor.
How do you install door flush bolts?
How to fit the flush bolt keep into the frame. Next, slot the flush bolt into the hole and be sure to pilot drill the holes before screwing it up. Finally, screw the door back on and close it. Flick the lever so the bolt goes up and mark around it on the floor or head of the door lining.
What is a flush pull?
Bypass door pulls or flush pulls are a simple recessed pull used on bypass doors. Called flush pulls because they are flush with the surface of the door, these pulls allow doors to slide in front of one another without getting hung up on the door hardware.
What is auto flush bolt?
Automatic Flush Bolts deploy rods automatically into the door frame header and floor, when the active leaf is closed. The rods prevent the inactive leaf from being opened. When the active leaf is opened, the flush bolt rods retract on the inactive leaf, allowing both doors to open.
What are auto flush bolts?
What is the difference between flush jamb and flush pull?
Flush Pull is where the door protrudes from the jamb when the door is open. Flush Jamb is where the door is flush with the jamb when it is open, hiding the door.
What is flush pull handle?
Used as a recessed mounted handle for sliding or swinging door applications. Mount this style of handle on the wall face of a sliding door.
What are the parts of a door bolt called?
Box & Strike Plate The bolt extends from the cylinder into a small square shaped hole—this is the “box”. It is designed to hold the bolt securely in the doorframe when the lock is engaged. The metal plate, which attaches to the frame of the door, is the strike plate.
What is a door bolt?
Definition of door bolt : a sliding bolt for locking a door.
The flush bolt is recessed into the top edge of the inactive door; when it is projected, it will extend into the strike in order to keep the door closed. When it is retracted, the door can be opened and closed freely.
How do you choose a flush bolt for a garage door?
The height of the door can determine the length of rod that will be used. Self-latching flush bolts are often called constant latching flush bolts. These bolts are a combination of the manual extension flush bolts and automatic latching flush bolts. The top bolt must be manually retracted by a push-button or slide in order to open.
What are self latching flush bolts?
Self-latching flush bolts are often called constant latching flush bolts. These bolts are a combination of the manual extension flush bolts and automatic latching flush bolts. The top bolt must be manually retracted by a push-button or slide in order to open.
How do you use the automatic latching on a flush door?
This automatic latching is accomplished by a small spring-loaded button on the edge of the flush bolts which, when depressed, will extend the flush bolts and remain latched. When the active leaf is opened, these buttons will protrude from the edge of the door which pulls the flush bolts to the retracted position.