What is the carriage on a lathe machine?
Lathes also have a carriage, which is found nestled between the headstock and tailstock. The carriage is responsible for guiding the tool bit as it cuts or otherwise manipulates the workpiece.
What is the cross slide on a lathe?
Definition of cross slide : a member of a machine (as of a lathe) on which the tool carriage moves at right angles to its principal direction of travel.
What is the function of carriage?
Carriage : carriage holds the tools and provides movement of the tool in both cross and longitudinal directions. For taper turning and facing cross feed is used for conventional turning carriage provides longitudinal feed. Carriage contains some other parts .
What are two main parts of the lathe carriage?
The main parts of the lathe, all parts are bolted to the bed. It includes the headstock, tailstock, carriage rails and other parts. Carriage: The carriage is located between the headstock and the tailstock and contains apron, saddle, compound rest, cross slide and tool post.
What are the parts of carriage?
There are two major components to the carriage, the saddle and the apron.
How does a cross slide work?
The milling machine or drill press cross slide moves a workpiece across the axis of a revolving tool bit to effect cutting operations. Both types typically achieve their motion by means of two lead screw mechanisms which allow for a high degree of control and very precise advancement.
How do you adjust a cross slide on a lathe?
Adjusting Cross-slide Backlash
- Loosen the two outer screws using a 3mm hex wrench.
- Loosen the middle screw using a 2.5mm hex wrench.
- Tighten the middle screw until it is just snug.
- Tighten the two outer screws until just snug.
What is cross feed?
Definition of cross-feed (Entry 1 of 2) : a feeding mechanism that acts transversely to the longitudinal axis of the machine bed — see feed entry 2 sense 5. cross-feed. verb.
What are the two main components of the carriage?
What is the purpose of apron in lathe?
The apron is the front face of the carriage. It is where the feed controls are located on most manual lathes. The apron is also a housing for the gears and associated mechanisms related to power feeding of the carriage and cross slide.
What are the four major parts of a carriage?
Carriage: The carriage is located between the headstock and the tailstock and contains apron, saddle, compound rest, cross slide and tool post.
What is an apron in lathe?
Which of the following part of machine is a cross slide?
Which of the following part of lathe move in a direction normal to the axis of spindle? Explanation: Cross slide move in a direction normal to the axis of spindle during the process of machining in lathe machine.
How do you adjust a lathe cross slide?
In what direction does the cross slide move?
With a typical cross slide, the top slide is locked at a right angle (90°) to the bottom slide. The top slide moves along the X axis, the bottom slide along the Z axis.
Is cross feed and longitudinal feed?
Lathe tool post can move parallel to the lathe bed or perpendicular to the bed. Movement of tool post/ tool parallel to the bed is called longitudinal feed whereas movement perpendicular to the bed is called cross feed.
What is cross feed in milling?
: to feed into a machine transversely.
What are the two main components of the carriage on a lathe?
What are the different parts of carriage?
What do you mean by carriage?
Definition of carriage 1a : a wheeled vehicle especially : a horse-drawn vehicle designed for private use and comfort. b British : a railway passenger coach. 2 : a wheeled support carrying a burden. 3a : manner of bearing the body : posture that slender unrigid erectness and the fine carriage of head— Willa Cather.
Which part of a lathe carries the cross slide and tool post?
Saddle: It is an H–shaped casting fitted over the bed. It moves along the guideways. Cross–Slide: It carries the compound slide and tool post. It can be moved by power or by hand.