What is CL50?
Form CL50. Description. Australian credit licence annual compliance certificate. Purpose. Credit licensees must lodge an annual compliance certificate with us and pay the fee for every year that they hold the credit licence.
What class is ductile iron pipe?
Based on the parameters discussed above, the member companies agreed to set a standard of thickness for ductile iron pipe as Class 1 – Class 6.

What is the class of DI pipe?
DI pipes Class K7 and Ductile Iron Pipe Class K9 exceptionally assorted applications and they are capable of withstanding surge and high pressure. We likewise give IS 8329 Class K7 and K9 Pipe at a reasonable cost. DI K7 and K9 types of pipes have unique mechanical properties and they have high tensile strength.
What pressure class is Class 52 ductile iron pipe?
All Thickness Class DI pipe have a pressure rating of 350-psi and, therefore, sufficient for containment of at least 900-psi water, joint restraint dependent.

What is Class A in cast iron pipe?
Class LA cast Iron pipes have been taken as the basis for evolving the series of pipes. Class A cast iron pipes allow a 10 percent Increase in thickness over class LA cast iron pipes. Class B cast iron pipes allow a 20 percent Increase In thickness over class LA cast Iron pipes.
What is class K9 ductile pipe?
The K9 Ductile Iron Pipes are designed with excellent mechanical properties. These pipes possess a minimum tensile strength of 420Mpa and a minimum yield strength of 300Mpa. The Class K9 Ductile Iron Pipes can be easily elongated by a minimum of 10% and still possess excellent workability.
What is difference between K7 and K9 DI pipe?
K7 and K9 is different pressure class of D.I pipes, the 7 and 9 represents internal pressure withstanding capacity of D.I pipes, Mainly 7 and 9 are respective MPa/cm^2. K9 pipes are heavier than K7 pipes for same dis.
What is meaning of K7 in DI pipes?
The number ‘7’ in Class K7 means pressure class of the DI pipe and 7 represents the pipe’s internal pressure withstanding capacity. Ductile iron pipe specification is as follows ANSI/AWWA C104/A21.
Is ductile iron NSF 61?
Fittings – Ductile Iron Materials in contact with potable water shall be certified NSF/ANSI 61 per the standard.
What is AWWA C151?
50 ANSI/AWWA C151/A21. 51. Pressure classes are defined as the hydrostatic water working pressure of the pipe in psi. The thicknesses shown are adequate for the rated hydrostatic working pressure plus a surge allowance of 100 psi with a safety factor of 2.0 for that sum.
What is the difference between K7 and K9 DI pipe?
What is K9 in DI pipes?
ISO 2531 Class K9 Class K9 DI pipe specification is based on the Nominal Wall Thickness as well as the Nominal Diameter of the pipe. DI K9 Pipes are heavier than Ductile Iron Class K7 pipes. DI pipes Class K7 and Class K9 have very diverse applications and they are capable of withstanding surge and high pressure.
What is the difference between K7 and K9 DI pipes?
What is pipe class K12?
Ductile iron Class K12 pipes are used all over the globe today, as such pipes are corrosion resistant and they also provide toughness, ductility and strength. The wall thickness of Class K12 Di Pipes is 7mm.
Is code for ductile iron pipe?
1.2 For the purpose of this code, ductile iron pressure pipes and the fittings shall conform to IS : 8329-1977”. 2.1 General – The choice of route for a pipeline is governed by economic considerations and other factors such as overhead and underground cables, existing pipelines and traffic flow.
Is Cast Iron NSF approved?
NSF International announced that The Cast Iron Soil Pipe Institute (CISPI) member companies’ soil pipe and fitting products have been certified. Cast iron soil pipe and fittings are used in building construction for sanitary and storm drain, waste and vent piping applications.
What is the difference between AWWA C110 and C153?
Description: Today, standard compact fittings C153 are commonly used in place of full Body fittings C110. They are designed to be to be more lightweight and more economical to use while providing better flow characteristics.
Should I replace cast iron sewer pipe with PVC?
Durable – Polyvinyl Chloride can last up to 70 years or more. Replacing cast iron pipe is expensive as they deteriorate from oxidization. Cleaner – Because PVC doesn’t corrode or rust, you won’t get any metal in your sewage or drinking pipes. It’s a non-toxic material, safe to use for all kinds of plumbing purposes.
Should you buy a home with cast iron pipes?
Overall, it is perfectly fine to buy a house with cast iron pipes. Regardless of what plumbing a house has, be it cast iron, copper, or PVC the plumbing is susceptible to suddenly needing to be replaced. It’s highly recommended to have the plumbing inspected prior to buying a house.