How do I fix a tire pressure monitor fault?
Press the TPMS reset button and hold it until the light blinks three times, then release it. Start the car and let it run for 20 minutes so it can reset the sensor. The tire pressure monitor reset button is located beneath the steering wheel. Check your user’s manual if you’re having trouble locating it.
Why does my car say tire pressure monitor fault?
The “tire pressure sensor fault” message is an indication that there is a problem with the tire pressure monitoring system (TPMS). A tire pressure monitoring system is required for all motor vehicles manufactured after 2007. The pressurized air inside the tire is monitored by the TPMS.
How much does it cost to fix a tire pressure sensor fault?
Luckily, it typically costs between $80-$140 to fix a tire pressure sensor, depending on your car model. If your car’s still under warranty, the cost of replacing a sensor may be covered. Check with your dealership if you believe this is the case for you.
What causes a tire sensor fault?
There is most likely an issue with a tire pressure sensor or the connection to the sensor. The error code may tell you that the tires’ air pressure is too low or too high or that one of the tire pressure sensors is defective. It could also be caused by a faulty TPMS control unit, faulty wiring, or a TPMS reset.
How serious is a tire pressure sensor fault?
You would notice the “tire pressure sensor fault” on the car’s dashboard with such a device in place. It would appear when the tire pressure appears low or something more serious. Such a warning message can make you work on the problem faster before it escalates to something more serious.
Why won’t my check tire pressure light go off?
If you’ve inflated your tires to the proper air pressure, but the warning light stays on, you may have a leak or there’s a problem with the TPMS in one or more of your tires. It’s simple enough to check if there’s a leak in a tire. Just use your tire gauge to recheck the air pressure in all your tires.
Can tire pressure monitoring system be disabled?
Yes, there is a sophisticated yet non-invasive method of disabling your tire pressure monitoring system. All you have to do is use an emulator designed to bypass the TPMS. The TPMS bypass emulator is a small box-like device equipped with technology to “turn off” your tire pressure monitoring system.
Can you drive with tire sensor fault?
No, driving with the TPMS Light on is not safe. It means one of your tires is underinflated or overinflated. You can find the proper tire pressure for your car in your owner’s manual, or on a sticker located on the door, trunk, or fuel door.
Can you reset TPMS yourself?
With the vehicle off, turn the key to the “on” position, but don’t start the car. Hold the TPMS reset button until the tire pressure light blinks three times, then release it. Start the car and wait 20 minutes for the sensor to refresh. The TPMS reset button is usually located beneath the steering wheel.