How do I turn on my iGrill Mini?

Press the power button located at the center of the faceplate once, quickly. The display will light up and illuminate white, indicating that the iGrill Mini has powered on.

Table of Contents

Can’t connect to iGrill?

Remove and reinstall the battery, press the device reset button with a pen, and then “Unpair” or “Forget this Device” from Bluetooth® settings on your smart device. Have you tried restarting the app? The app may sometimes have trouble finding your iGrill Mini, so restarting the app can help.

How long does the iGrill Mini battery last?

Battery Life: The iGrill Mini single battery lasts for 150 hours.

How accurate is the iGrill Mini?

The iGrill Mini’s thermometer proved very accurate; we compared its results to those of a digital thermometer, and found that both registered a pot of boiling water correctly at 212 degrees Fahrenheit.

Does iGrill turn off automatically?

Auto Shut-Off: The iGrill 3 will stay powered on for five minutes before automatically turning off if there are no probes installed and if it is not paired to a smart device. The iGrill 3 will stay powered on for eight hours before automatically turning off if not paired to a smart device and if probes are installed.

Where do you put iGrill probes?

Insert a probe into the probe port on your iGrill 3. Insert the tip into the thickest part of the meat ensuring the first ¼ inch (0,5 cm) of the probe is fully inserted into the meat. Select the meat/fish/poultry you are cooking and a desired preset temperature or create your own.

How do you check propane level in iGrill?

Where can I track my remaining propane levels with my iGrill 3?

Open the Weber iGrill App.
Tap on the Temperature tab.
Tap on the gear icon.

How do I reset my iGrill?

How do I reset my device?

Separate the iGrill 2 from its base.
Open the battery compartment.
Remove the batteries for 30 seconds.
Replace the batteries and turn the iGrill 2 back on by pressing the power button once, quickly.
Hold down the reset button in the battery compartment for about 5 seconds.

Can I use the iGrill Mini in the oven?

iDevices claims that iGrill Mini can measure temps ranging from -22 degrees to 572 degrees Fahrenheit. I didn’t test these extremes, but that suggests that you can put this thermometer in a smoker, grill, or oven on various settings without much cause for concern.

Is the Weber iGrill mini worth it?

In conclusion. This Weber iGrill Mini review covers the bulk of everything you need to about Weber’s small thermometer. Our opinion is that the product works well in reading food temperature. However, we would have liked it more if it had more than one port.

How do you turn off the iGrill2?

Press and hold down the power button located at the bottom of the faceplate between the < and > buttons for three seconds. The display will show “OFF”. Upon releasing the power button, the iGrill2 will turn off.

How long do iGrill probes last?

These meat probes barely last 4 or 5 grilling sessions before they malfunction.

Where is the reset button on the iGrill Mini?

Open the battery compartment by rotating the battery door counter-clockwise. Remove the battery for 30 seconds. Replace the battery and turn the Kitchen Thermometer Mini back on. Hold down the reset button in the battery compartment for about 5 seconds.

How do I put my iGrill Mini in pairing mode?

In order to get connected to your iGrill Mini, 2, or 3, please follow these steps:

Download the Weber iGrill App (Apple and Android)
Enable Bluetooth on your smart device.
Turn on the iGrill Mini, 2, or 3.
Open the Weber iGrill App.
Tap ‘Start Grilling’ followed by ‘Pair’ on the photo of your iGrill Mini, 2, or 3.

Can I use an iGrill Mini with any grill?

FAQs Related to Weber iGrill Mini Yes, this thermometer is designed for any smoker, oven, and grill that doesn’t spin while cooking.

Can I use Weber iGrill Mini in oven?

How do I start iGrill?

Initial Setup Open the Weber iGrill App and select your iGrill Mini. The iGrill Mini will request to pair automatically. When the Smart LED is solid blue, you are now connected. Once you have completed the initial connection through Bluetooth®, you are now ready to select what you’re grilling and get started!

How do I set up iGrill?

Where do you put the grill probe?

When you start your smoker, insert your digital meat probe into the deepest part of your cut of meat. For steaks or a roast, this area is usually in the middle. Poultry is deepest along the depth of the inner thigh.