What is a gearbox on an airsoft gun?
Inside the Airsoft Gun The modern airsoft gearbox is made from a mechanical system that is comprised of the gears and motor to transfer electrical into mechanical energy to fire the gun. The mechanical energy is transferred to the air system when the piston meets the sector gear.
What gearbox does Lancer tactical use?
The Lancer Tactical Complete M4 Proline Gearbox is a factory replacement Proline series complete gearbox.
What does shimming your gearbox do?
Why Should You Shim Your Gearbox? Shimming your gearbox will lead to less strain on your motor, and a longer lasting gearbox. Because stock guns are almost never shimmed correctly, the gears can rub against each other. This can cause them to break, or damage other parts of the gearbox.
Does a Lancer Tactical Gen 2 have a Mosfet?
The Lancer “Fast Trigger”: Lancer Tactical Hybrid Gen 2 AEGs also come fully equipped with the Lancer Fast Trigger just like the ProLine series. Modeled with a bladed flat trigger design, an ETU and a MOSFET all located within the gearbox, additional wiring has been reduced, amplifying trigger response.
What is AoE Airsoft?
AoE stands for Angle of Engagement. That is a fancy way of saying how the sector gear hits the piston. Ideally, you want it to be as even as possible between the sector gear and the piston itself.
What does it mean to shim gears?
Shimming is the practice of using small spacers (shims) to precisely align the gears in an AEG gearbox so that they operate smoothly. A poorly shimmed gearbox often results in a loud whining noise while firing, premature parts wear, stress on the motor, a reduced rate of fire, and poor battery life.
Are Lancer Tactical Gen 2s good?
Superb accuracy, reliable performance, and solid construction coalesce into a unified package that definitely feels like one of the best entry level guns you can buy.
What is the RPS on Lancer Tactical Gen 2?
The Lancer Fast Trigger pushes about 20-25 RPS, and shoots consistently within a 2-3 FPS range.
What is a Sorbo pad?
The Sorbo Pad Sorbothane Cylinder Head Damper is specifically designed for airsoft version 2 and 3 AEG cylinder heads and also compatible with VSR rifles. It may also work on other cylinder heads with centered nozzles and standard diameter cylinders.
Do you need to correct AoE?
Ideally, you want it to be as even as possible between the sector gear and the piston itself. No gun comes with correct AoE, and by correcting it, you can make your stock piston last much longer than it normally would.
Is MOSFET necessary airsoft?
Airsoft Gun Without a MOSFET When the trigger is unpressed, the circuit remains broken, with no current flowing through it. However, when the trigger is pressed in, the trigger switch closes the circuit, allowing electricity to flow and the motor to activate, which fires the gun.
What is a Shimmed diff?
“Shimming the diff” refers to placing small spacers (look like washers) behind the gears to set the correct gear mesh. As the gears wear down the gap between them increases. If you place the shims properly you regain the proper mesh and increase the life of your gears.
Is AEG better than GBBR?
If you set realism as a high priority, we recommend to go for a GBBR. But if you still like the idea of a simple plug and play or don’t want to worry about cool down or prefer bigger capacity magazines, you best go for an electric recoil system. This AEG system is somewhat a nice middle way between the two.
Do CO2 mags in green gas guns?
Using CO2 Magazines in a Green Gas Gun The Co2 is stored safely in the magazine, since it’s designed to be used with CO2. However, the rest of the gun is not designed for it. The Hammer may not be strong enough to depress the valve and initiate firing, the slide may not be strong enough.
Is Lancer Tactical airsoft guns good?
5.0 out of 5 stars Excellent Airsoft Rifle for the Price. The Lancer Tactical Proline is full metal, the mock suppressor and handrail is metal too. It does has a micro switch and mosfet at the trigger. I can run Lipo batteries without any problems.