What does the button on Dell docking station do?
Identifying Parts and Features. NOTE The dock button is designed to replicate your system’s power button. If you connect the Dell Docking Station WD19 to supported Dell computers, the dock button works like your computer’s power button and you can use it to power on/sleep/force shutdown the computer.
How do I wake up my Dell docking station?
System does wake from sleep when connected with a USB Type-C cable to the WD15 with an open notebook lid. Some times pressing the dock power button or using an attached keyboard/mouse will wake the system once docked.
Why won’t my docking station detect my monitors?
Actually power cycling the docking station can be one way to trigger monitor re-detection. Make sure to wait a while before plugging in again.
Why won’t my monitor wake up?
If the monitor does not wake up from sleep mode, ensure that the computer is not in sleep or hibernate mode.
How do you get a computer out of sleep mode?
Press and hold the power button on your computer for five seconds. This should bring the computer out of Sleep Mode, or it will do the opposite and cause a complete shutdown, which should allow you to then restart the computer normally.
Why does my docking station not recognize second monitor?
If your laptop is working but you cannot get the screens to display on your external monitor, and you have verified that all your cables are tightly connected, you may need to power-cycle your Dell docking station. This issue often occurs after a power outage.
Why is my Dell docking station not working?
Ensure that the latest BIOS and drivers for your laptop and the docking station are installed on your laptop. If your BIOS Setup has a USB Enabled/Disabled option, make sure it is set to Enabled. Verify if the device is detected in Windows Device Manager and that the correct device drivers are installed.
How do I get my docking station to recognize my second monitor?
Open Settings. Click on System. Click on Display. Under the “Multiple displays” section, click the Detect button to connect to the external monitor.
How do I get my computer to recognize my docking station?
If your docking station is not recognized, you can connect to AC power while undocked then try a two button reset by pressing and holding the power button on your device for 30 seconds, then after it turns off, press and hold the volume-up button and power button simultaneously for at least 15 seconds.
Why is my Dell monitor not being detected?
If it appears that the power is working on every other device but the monitor still isn’t working, it could be the power cable for your Dell monitor. See if replacing the Dell Power Cable fixes the issue. You can call or contact Dell to get a replacement power cable.
How do I get my Dell monitor out of sleep mode?
To wake up a computer or the monitor from sleep or hibernate, move the mouse or press any key on the keyboard. If this does not work, press the power button to wake up the computer. NOTE: Monitors will wake up from sleep mode as soon as they detect a video signal from the computer.