How do I install BB92?
- Step 1 How to install BB92 Bottom Brackets.
- For aluminum or steel frames, grease the BB shell.
- Slide the cup into the frame as far as it will go.
- Place the tool over the cup.
- Use a bearing press to slowly press in the BB cup, by sure the cup goes in straight.
- Insert center tube into the frame.
Does BB92 press-fit?
So then what’s a BB92? The BB92 standard, also known as Shimano Press Fit, uses a bearing housed in a nylon or aluminum cup that is pressed into a bottom bracket shell that measures 92mm wide. This standard is designed around the 24mm spindle diameter used by Shimano.

How long do press fit bottom brackets last?
They are still in use and come stock on many bicycles, especially lower end ones. These bottom bracket units can actually be pretty sturdy and can last for years or decades and the user pretty tosses in a new one when it seizes up in a rainstorm.
Can I use lithium grease on bottom bracket?
It’s also essential to note that lithium grease is a heavy-duty grease. It can withstand extreme temperatures and offers excellent water resistance. These qualities make it a solid choice for bottom bracket usage. Polyurea is another type of multi-purpose grease utilized in high-temperature situations.
Can I reuse press-fit bottom bracket?
According to GCN and their video on press fit BB removal, press fit bearings are not designed to be removed and re-used.

Can you reuse a press-fit bottom bracket?
Should you grease a press fit bottom bracket in carbon frame?
Clean the inside of the BB shell with alcohol and a fresh rag. For an aluminium frame, a light coating of grease can prevent creaking. Most manufacturers advise not to use grease on a carbon frame but it’s unlikely to cause problems.
What cranks work with BB92?
This means all 24mm high-end Shimano (Hollowtech II) and SRAM (GXP) cranks fit into BB92.
Is BB92 the same as PF30?
Short version is NO. Standard press-fit (AKA BB92) has a 41mm (or occasionally 42mm) bore and 92mm wide shell, PF30, which is a variation on BB30 has a 46mm bore, plus a shorter shell.
Do press fit bottom brackets creak?
The reality is pressfit has nothing to do with creaking. There are many areas of a bike where bearings have a pressfit and there are no problems. For example, wheels, freehubs, pulley wheels and some headsets are pressfit yet they don’t generally creak.
Should bottom bracket threads be greased?
With the threads now clean and sharp the next step is to prepare them with a layer of good quality grease. The grease will enable a smooth fit between the cups and the frame, the grease will also reduce the chance of corrosion developing between the materials in the bottom bracket shell and those in the cups.
Should you grease crank spindle?
With or without lubricant, in use, cranks will make metal-to-metal contact with the spindle, causing fretting erosion of the steel spindle for all but the lightest riders. Lubricating the spindle for assembly assures a predictable press fit for a given torque.