How much does a KA 50 cost?
$16 million
Kamov Ka-50
Ka-50 “Black Shark” Ka-52 “Alligator” | |
---|---|
Status | Limited service |
Primary user | Russian Air Force (VVS) |
Number built | Ka-50: ~10 Ka-52: 5(prot.) + 35(serial) |
Unit cost | 500 million rubles (approx. $16 million) as of May 2011 |
Which helicopter has the longest range?
The Lockheed AH-56A Cheyenne is the longest range helicopter with a flight range of 1225 miles.
How heavy is a Eurocopter?
Initial M.T.O.W. of 2,630 kg (5,798 lbs), later raised to 2,720 kg (5,997 lbs) and then 2,835 kg (6,250 lbs).
Does Russia still use Ka-50?
During the late 1990s, Kamov and Israel Aerospace Industries developed a tandem-seat cockpit version, the Kamov Ka-50-2 “Erdogan” (Russian: Эрдоган, Turkish: Erdoğan), to compete in Turkey’s attack helicopter competition….Kamov Ka-50.
Ka-50 “Black Shark” Ka-52 “Alligator” | |
---|---|
Number built | Ka-50: 32 Ka-52: 100+ |
Developed from | Kamov V-80 |
How much does a Eurocopter cost?
Depending on numerous factors, the average price for a pre-owned AIRBUS/EUROCOPTER EC 135 T2 is $3,000,000.00. A $1,500,000.00 loan over 120 months including $6250 per month in interest equates to a $75,215.57 per-period payment.
How many Ka-52 are there?
The Alligator first flew in 1997 and began manufacturing in 2008. By 2011, the Ka-52 entered service in numbers with the Russian air force. There are about 70 in the Russian fleet.
Where is the h-220 heliport located?
The H-220 Heliport was attached to Camp Mobile. Camp Mobile was located on 30.8 acres in the city of Dongducheon (also written Tongduchon), which was located approximately 40 miles north of Seoul and boasted a population of 70,000.
What are the mounting holes of the H220?
The mounting holes of the H220 have a standard inner diameter of 0.32 cm (0.125 in). Indirect Electrical Connection (Cable) Method The second method is to mount the H220 mechanically, so you can connect a ribbon power/data cable to the H220.
How do I mount the H220 on the carrier board?
Place an RF connector, heading connector, and mounting holes on the carrier board and then mount the H220 on the standoffs and RF header connectors. This method is very cost effective as it does not use cable assemblies to interface the OEM board. The H220 uses a standoff height of 0.79 cm (0.3125 in).
How do I use the header connector on the H220?
The H220 uses a dual-row 34-pin (17 pins x 2 rows) header connector to interface with power, communications, and other signals. To identify the first header pin, orient the board so the diamond is to the upper left of the pins; the first pin is on the left directly below the diamond (see Figure 2-2).