What is a W1 2?
The Curve (W1-2) horizontal alignment warning sign is used to advise motorists of a change in the roadway alignment. This sign face is a diamond shape with a black legend and border on a yellow background.
What is a W12 2 sign?
Standard: 01 The Low Clearance (W12-2) sign shall be used to warn road users of clearances less than 12 inches above the statutory maximum vehicle height.
What does a W1 6 sign mean?
One Direction (Single Way) Large Arrow
Alert motorists of upcoming situations that may alter driving conditions with Warning Signs. Details. Federal MUTCD #W1-6 “One Direction (Single Way) Large Arrow” sign. Displayed when vehicle traffic is only permitted in a single direction. #W1-6L is for a Left Arrow.
What is a W1 5 sign?
Traffic Sign | W1-5 Warning sign – Specification: W1-5L and W1-5R. Sign to describe a winding road going left to right or winding road going left to right. All traffic signs are available with Engineer Grade, High Intensity and Diamond grade reflective sheeting on . 080 gauge aluminum.
What does a winding road sign look like?
Winding road signs are diamond-shaped with a yellow background and black symbols. Placed in advance of 3 or more successive curves in the road.
What is the shape of a sign that warns you a divided highway is beginning?
diamond-shaped
Divided highway signs are diamond-shaped with a yellow background and black symbols. Posted at the approach to a divided section of highway where the two lanes of traffic are separated by a physical barrier or median.
What is a W1 8 sign?
Warning sign – Specification: W1-8L and W1-8R. This signs is commonly referred to as a Chevron symbol to be applied in Roundabout curves,onramps,and off ramps. All traffic signs are available with Engineer Grade, High Intensity and Diamond grade reflective sheeting on .
What does the W1 4 sign mean?
Reverse Curve
The Reverse Curve (W1-4) horizontal alignment warning sign is used to advise motorists of a change in the roadway alignment. This sign is used instead of multiple Curve (W1-2) signs when there are two changes in roadway alignment in opposite directions that are separate by a tangent distance of less than 600 feet.
What does JCT stand for on road signs?
junction
When you see JCT on a freeway sign, it stands for junction. A junction is a place where two or more roads meet. The roads could be above or below each other (which is called an interchange), or they could intersect (which is called an intersection).
What is the T junction sign?
The T- Junction sign means there is a right or left turn and the end of the current road. The right of way is shown by the direction the thicker line is pointing.
What is the difference between divided and undivided highway?
A divided highway is one where the lanes going in opposite directions are divided by a barrier of some sort — usually a concrete barrier or a grass divide. An undivided highway has nothing physically separating you from the oncoming traffic.
What is Chevron signs?
A striking way to keep your drivers safe, chevron signs show the edge of the road, dangerous curves, or other hazards. Chevrons are most often used on the outside of a curve or the narrowing of a road.
What sign means slippery when wet?
The slippery road sign is a warning sign. Slippery road signs are posted in areas where a slippery condition might exist. Drivers should use extreme caution and slow their speed when the road is wet or icy. Avoid any sudden changes in direction when conditions are poor.
What dies JCT stand for?
When you see JCT on a freeway sign, it stands for junction. A junction is a place where two or more roads meet.
What does P 1 mile sign mean?
Parking. Parking-related signs are usually blue rectangles with white writing. The sign below shows that parking is one mile ahead. If this sign is displayed then vehicles can park fully on the verge or footpath.
What are the 3 types of intersections?
The three basic types of intersections are the three-leg or T-intersection (with variations in the angle of approach), the four-leg inter- section, and the multi-leg intersection. Each intersection can vary greatly in scope, shape, use of channelization and other types of traffic control devices.
Can you cross two sets of double yellow lines?
YOU CANNOT cross a double yellow line to pass another vehicle. Two sets of solid double yellow lines that are two or more feet apart sometimes appear as a road marking. Such lines stand for a solid wall. Don’t drive on or over these road markings.
What is T junction chevron?
T-JUNCTION CHEVRON. Where: On any road. Purpose: To warn that the road ahead does not carry on straight, but merges with another road. Action: Slow down to turn left or right or stop. This sign is normally found with a T junction sign.
What are hazard markers?
Hazard markers tell you the direction to take when approaching the obstacle or driving past the hazard. You must obey these signs. Sign. Meaning. Drive to the left of the hazard.
What is a double curve in driving?
The reverse curve (double curve) sign warns drivers of upcoming warn motorists of two successive turns or curves that follow each other in opposite directions.