How much does a Cisco access point cost?
$1,745.00
Download Quote Sheet
| #No | Product | List Price (USD) |
|---|---|---|
| 1 | AIR-CAP3602E-C-K9 | $1,745.00 |
| 2 | AIR-CAP3602E-A-K9 | $1,745.00 |
| 3 | AIR-CAP3602E-S-K9 | $1,745.00 |
| 4 | AIR-CAP3602E-T-K9 | $1,745.00 |
What is the Cisco Aironet?
Cisco Aironet is a maker of wireless networking equipment currently operated as a division of Cisco Systems.
How far does a wireless access point reach?
In general, one AP can cover up to approximately 2000 square feet, with variation based on the physical environment and wireless interference.
How do I find the range of an access point?
The Wi-Fi signal range of any given access point varies significantly from device to device. Factors that determine the range of an access point include the specific 802.11 protocol it runs, the strength of its device transmitter, and the nature of physical obstructions and radio interference in the surrounding area.
What is a Cisco Dual Band access point?
It refers to the 2.4GHz and 5GHz frequencies. 802.11b and g utilize the 2.4GHz band, while 802.11a uses the 5GHz band. 802.11n uses both. The differences between a,b,g, and n are supported data rates and modulation schemes. Sent from Cisco Technical Support iPhone App.
How do I connect to a Cisco wireless access point?
Cisco Wireless Access Points – Cisco Workgroup Bridges: Cisco Unified Wireless Network Configuration Example
- Enter the SSID name, VLAN ID, and the RADIO interface.
- In the Client Authentication Settings area, check the Open Authentication check box.
- Leave all other parameters with their default values.
- Click Apply.
How far away from router can Extender be?
Conclusion. A WiFi extender can generally be placed 100-400 feet from the router but this will not always guarantee great internet coverage in all areas of your home.
How far will a router reach?
A general rule of thumb in home networking says that Wi-Fi routers operating on the 2.4 GHz band can reach up to 150 feet indoors and 300 feet outdoors. Older 802.11a routers that ran on 5 GHz bands reached approximately one-third of these distances.
How do you determine the range of a wireless access point?
How to Calculate Wi-Fi Range
- Find the wireless device’s decibel-milliwatts (dBm) value, which you will find printed on a sticker underneath the device or in its manual.
- Add 4,000 as a base value if calculating a normal antenna.
- Subtract 2,000 to account for interference from daily signals.
- Divide the end value by 42.7.
How much area does a wireless access point cover?
A rough estimate is approximately one access point every 800 square feet or 75 square meters. In most cases, the biggest issue isn’t the access point signal reaching clients but the low power client signal getting back to the access point.
What is the purpose of wireless access point?
An access point is a device that creates a wireless local area network, or WLAN, usually in an office or large building. An access point connects to a wired router, switch, or hub via an Ethernet cable, and projects a Wi-Fi signal to a designated area.
What makes the new Cisco Aironet 2600 series access point unique?
The new Cisco ® Aironet ® 2600 Series Access Point delivers the most advanced features in its class – with great performance, functionality, and reliability at a great price.
How many antennas does a 2602i have?
5 Internal Antennas The 2602I model access points are configured with up to four dual-band inverted-F antennas and two 2.4-GHz/5-GHz dual-band radios. There are four antennas deployed inside the access point with one deployed on each corner of the access point top housing.
What is the rss-210 requirement for Cisco Aironet access points?
2. This device must accept any interference received, including interference that may cause undesired operation. Cisco Aironet Access Points are certified to the requirements of RSS-210.
Do I need a license to use a Cisco Aironet access point?
Cisco Aironet Access Points are certified to the requirements of RSS-210. The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system accordin g to the Canadian regulations. For further information, contact your local Industry Canada office.