How long was the Electra 225?
The Electra 225 nameplate was a nod to the car’s overall length of over 225 in (5,715 mm), earning it the street name “deuce and a quarter.” The Electra 225 Riviera was the top-line model and it shared its six window hardtop roofline exclusively with Cadillac (which offered it on all of its models).
How much does a 1972 Buick Electra 225?
**Figure based on a stock 1972 Buick Electra 225 valued at $9,500 with ON rates with $100/300K liability/UM/UIM limits. Actual costs vary depending on the coverage selected, vehicle condition, province and other factors.

How long is a 1972 Buick Electra 225?
Length: | 5789 mm / 227.9 in |
---|---|
Width: | 2032 mm / 80 in |
Height: | 1390 mm / 54.7 in |
Height with roof rails or antenna: | |
Wheelbase: | 3226 mm / 127 in |
How long is a 1973 Buick Electra 225?
The 1973 Buick Electra 225 was a large front engine rear drive vehicle. It was built as body on frame construction. It shared the “C-body” platform with the Oldsmobile Ninety-Eight and Cadillac DeVille. It rode upon a long 127” wheelbase, had the luxury length of 229.8” and a wide 79.3” stance.
How long is a 1970 Buick Electra 225?
Specifications: 1970 Buick Electra 225

Manufacturer: | Buick |
---|---|
Total Length: | 5734 mm, 225.7 in |
Total Width: | 2032 mm, 80 in |
Height at Kerb Weight: | 1397 mm, 55 in |
Wheelbase: | 3226 mm, 127 in |
What car was known as a deuce and a quarter?
Electra 225
Introduced in 1959 as the Electra 225, named for the car’s 225-inch length, the big Buick became known as the “Deuce and a Quarter.” The Deuce was one gi-normous automobile.
What kind of car is an Electra?
SUV
The Electra-X is an SUV with sleek bodywork and a sloping roofline. The design was produced by General Motors’ team in Shanghai, and the crossover is based on the Ultium platform that also underpins GM’s Cadillac Lyriq and GMC Hummer EVs.
What is a deuce and a quarter car?
Introduced in 1959 as the Electra 225, named for the car’s 225-inch length, the big Buick became known as the “Deuce and a Quarter.” The Deuce was one gi-normous automobile.
Why is it called a deuce and a quarter?
In 1972, Buick Motor Division’s top of the line series, the Electra, entered its fourteenth year. The Deuce and a Quarter, so named by its many fans due its impressive length of two hundred and twenty five inches.
What size engine was in a Buick Electra 225?
The Buick Electra 225 4-Door Sedan 1969 430-4 V8 has a V 8, Petrol engine with 7041 cm3 / 429.7 cu-in capacity.
What is a Buick Electra 225?
Electras had an overall length of 224.9 inches and a 126-inch wheelbase, and pillared four-door sedans like today’s featured car weighed in at 4253 pounds. In the Electra 225 lineup, there was also a $4221 four-door hardtop and $4330 two-door hardtop. The pillared sedan retailed at an even $4200; 12,723 were made.
What was the last year of the Buick Electra 225?
Buick discontinued the Electra nameplate at the end of the 1961 model year, leaving only the Electra 225 starting in 1962. The Electras were powered by Buick’s 401 cid (6.6 L) V8 from 1959 until 1966. An available 425 cid version of the same engine was available from 1964 to 1966.
What car was nicknamed a deuce and a quarter?
How much does a 1970 Buick Electra weigh?
Specifications: 1970 Buick Electra 225
Manufacturer: | Buick |
---|---|
Ground Clearance: | n/a |
Kerb Weight: | 2064 Kg, 4550 Lb |
Weight Distribution (Front): | n/a |
Engine Manufacturer: | GM |