How do I troubleshoot my Frigidaire Affinity washer?

How to Troubleshoot a Frigidaire Affinity Washer

Table of Contents

Stop the washing machine if rattling or clanking sounds occur.
Redistribute the load if you hear a thumping sound.
Level the washer if the machine vibrates.
Plug the power cord in and check household fuses or breakers.
Turn the water supply faucets on completely.

Why does my Frigidaire Affinity washer keeps pausing?

This is most often going to indicate an issue with the computer thinking the door is not securely closed/locked. This can be from a damaged door strike (on the back of the door) or from a mechanical or electrical failure with the door latch/lock (mounted on the machine, in line with the door strike).

Why won’t my Frigidaire washer drain?

If the washer won’t drain or is not draining properly, and the washer has a coin trap, remove the coin trap and clean it thoroughly. First, check the drain hose to determine if it is kinked, twisted, or bent. If the drain hose is bent, straighten it out. In addition, remove the drain hose and check it for obstructions.

How do I find the error code on my Frigidaire Affinity dryer?

How to Retrieve the Error Codes in a Frigidaire Affinity Front…

Press and release any button on the dryer’s display panel to awaken it from idle mode.
Wait for 5 to 10 seconds then push and hold “Start/Pause” and “Cancel” at the same time.
Watch for the indicator lights on the control panel to flash.

Why does my washer keep pausing?

Some of the most common faults that will make your washer stop mid cycle include thermostat failure, problems filling up with water for the rinse cycle, or even pump problems that prevent your washer from draining. One thing that you can check yourself is the lid switch.

Why does my front load washer keep pausing?

During the rinse cycle, the water inlet valve opens to allow water to enter the wash tub. If the water inlet valve fails, the washer will continue waiting for the water to enter the washer, causing it to stop mid-cycle. To determine if the water inlet valve is defective, use a multimeter to test it for continuity.

How do I force my Frigidaire washer to drain?

How to Drain a Top-Loading Washing Machine

STEP 1: Turn off the power. Switch the power button on the machine off, if your model has one.
STEP 2: Locate the drain hose and water supply hoses.
STEP 3: Drain the washing machine of water.
STEP 4: Remove a drain hose clog.
STEP 5: Remove a drain pump clog.

How do you reset the code on a Frigidaire dryer?

Reset. The first thing to do when an error code appears on the Frigidaire dryer is to reset the unit. Press “Pause/Cancel” twice to cancel the current operation. Make a new dryer cycle selection and press and hold “Start.” If the E68 error code comes back, press “Pause/Cancel” twice again.

Is there a reset switch on a Frigidaire refrigerator?

Press the Power Cool and Power Freezer buttons at the same time, on the display panel. Hold the buttons for a short time. The refrigerator will be reset and the fridge will start cooling again.

Why does my washer start to spin and then stop?

A clogged drain trap can be a common non-mechanical reason for a front-load washer to stop spinning. Lint and small items that have been left in pockets or inadvertently picked up with the laundry may collect in the drain trap.

Why does my washer randomly pause?

Does a Frigidaire dryer have a reset button?