Are Whitfield pellet stoves still made?
Whitfield is a discontinued brand of pellet stoves and fireplace inserts. Whitfield was a part of Lennox Hearth Products, now known as Innovative Hearth Products.
Why does my Whitfield pellet stove keep shutting off?
If the stove runs less than 5 minutes before shutting down, it may not have reached the minimum temperature for the low limit sensor to take control after the start up cycle. Try running the start-up cycle again and if it still shuts down the low limit sensor may be stuck open.
Does a pellet stove have a fuse?
Procedure to Diagnose Issue When your Pellet Stove Control Panel Fuse Blows. 1. Put in a new fuse on the control board/panel and time how many minutes or even seconds it takes from pressing the On button to when the fuse blows. This can help pinpoint which part may be causing the fuse to blow.
Are Whitfield pellet stoves any good?
The Whitfield Cascade® free-standing stove packs a lot of performance into an affordable, high-efficiency model. This impressive workhorse features a large fuel capacity and combustion to ensure clean, long burning times for uninterrupted warmth.
Who manufactures Whitfield pellet stoves?
Lennox Hearth Products, The current manufacturers of the Whitfield pellet stove and a division of Lennox Industries, was formed in 1996 and took over Pyro Industries in 1998. Country Collection, which used to be Country Stoves, acquired by Lennox Hearth products in 2006.
Why does my pellet stove shut off after a few hours?
My Stove Keeps Shutting Down You may have noticed the common causes for most pellet stove problems by now – a dirty unit, and poor air adjustment which won’t provide enough heat to trip the sensors. Also, your pellets might not being feeding into the auger correctly, due to a worn down or broken part.
How do you troubleshoot a pellet stove?
Troubleshooting Your Pellet Burning Issues
- Thoroughly clean and inspect hopper, auger plate, and switches.
- Inspect and clean auger, auger motor, combustion blower, and convection blower, and repair as necessary.
- Inspect all seals throughout the unit.
- Thoroughly clean out exhaust pipes and venting to the outside air.
What does low burn air mean on pellet stove?
Proper Flame The flame on a pellet stove needs to be hot — but not too hot. A low-burning, flickering orange flame, known as a “lazy” flame, is not hot enough to be efficient. A lazy flame usually has black tips or emits dark black smoke. This kind of flame needs more air for the pellet stove to be efficient.
How heavy is a Whitfield pellet stove?
Emissions Profile 20 0.4 gr./hr. Profile 30 1.9 gr./hr. Weight Profile 20 215lbs.
Why is my pellet stove turning itself off?
Does a pellet stove have a reset button?
The Pellet Stove Reset Button Many pellet stoves do not have a pellet stove reset button. Instead, you can reset them by letting the pellets run out. This way, you don’t have to try to move pellets out of the stove when you are not sure if it is hot.
Why will my pellet stove not turn on?
Clean all vents, check and repair/replace all gaskets, adjust damper or airflow setting. Adjust air-to-pellet ratio by increasing air flow. Adjust air-to-pellet ratio by increasing air flow and/or decreasing feed rate. Adjust air-to-pellet ratio by increasing air flow and/or increasing feed rate.
How do you reset the control board on a Englander pellet stove?
Press the “Off” button on the control panel to turn the pellet stove off if it is running. Unplug the cord and plug it back in. This clears the control board.
What is the average life of a pellet stove?
Common Issues. A properly installed and maintained pellet stove should last at least 10 years. Some have track records of more than 20 years, but most owners believe that stoves last as long as they can get parts.
Can pellet stove be repaired?
The most common cause of malfunction is ash buildup, which leads to poor burn quality, ignition failure, and excessive clicking in the hopper/auger. The national average cost to repair a pellet stove is between $300 and $500. Most people pay around $400 for a complete cleaning and replacement of the exhaust fan.
Why does the glass on my pellet stove get dirty so fast?
Either a lack of sufficient air supply or sufficient fuel can cause inefficiently burning fires that are producing more by-products such as creosote, which can stain the glass on a pellet stove more quickly when being released in higher quantities.