Can you install amp to factory head unit?
Usually, you’ll be installing a 4-channel amplifier with speaker-level inputs. The best way to connect it to a factory system is to tap into the stereo’s speaker outputs for the amp’s input signal. Then send the amp’s outputs back to the stereo’s harness, and on to the speakers through the factory wiring.
Where should I put my amp in my car?
A common place to fit an amp is in the trunk or luggage compartment of your car. However, if you’re driving, say, an SUV, space becomes limited and you’ll need to consider mounting the amp under, behind, or between the seats. Another consideration is that amps generate heat—hence the need for cooling fans.
Does a bigger box mean more bass?
the bigger the box, the lower they will hit. to a point. when you get to big it will all just sound like sh.it. if you want really deep bass look at the specs for the box that they tell you and just go slightly bigger if you want.
Do you need an amp for a subwoofer?
Do You Need An Amplifier for Your Subwoofer? In nearly all cases, the answer is yes. Unless you have a system in your car or boat that is already powering a subwoofer, you’ll need to find an amplifier that will power your sub.
What happens if my amp gets too hot?
Once it gets too hot, it shuts down for protection. The most obvious thing to check is your Gain and Punch Bass control settings. The gain adjustment (or control) is a level-matching control that adjusts the amplifier to work with the electronic piece(s) used before the amplifier.
Can I wire 2 tweeters together?
You can connect two or more tweeters in series by joining the amplifier and the speakers using a single cable. Suppose you have four speakers, A, B, C, and D, and an amplifier. In that case, you can wire the voice coils in series by connecting the positive terminal of A to the amplifier’s positive terminal.
Can you run a sub and speakers of the same amp?
Never connect both the speaker level and RCA jacks at the same time – speaker level signals can damage your head unit’s RCA outputs. If you’re wanting to install a 4 channel amp for 4 speakers and a subwoofer but only have 2 stereo channels available, that’s ok.