How do I connect my Canon mg3520 to my computer?

When using a computer or tablet equipped with a USB port, you can also connect it to the printer using a USB cable. Connect your computer or tablet to your printer with a USB cable. Once USB connection is complete, printer driver is automatically detected.

Table of Contents

How do I connect my Canon Pixma printer to USB?

Connect your printer via a USB cable Simply plug one end of the cable into the USB port on the Canon printer and the other into the USB port on your computer. Then, plug in the power cable and turn on the printer. After connecting the printer with your computer, you can follow Step 2 to install the printer driver.

What type of USB cable does a Canon printer use?

1 person found this solution to be helpful. Hello. Our printers do not come with USB cables. If you do not have a cable from a previous printer, you can purchase any standard A to B USB cable locally to make the connection.

Where is the USB plug on Canon printer?

The USB port is located on the rear of the printer.

Where is the WPS PIN on my Canon mg3520 printer?

Hold down the Stop button (A) on the printer until the (orange) Alarm lamp (B) flashes 15 times, then release the Stop button after the fifteenth flash. The wireless connection setting information including the PIN code will be printed.

Does Canon Pixma have a USB port?

The USB port is the upper port on the right side at the back of the printer. After you connect the cable, turn on the printer.

How do I connect my Canon Pixma printer to my computer?

WPS Connection Method

Make sure that the printer is turned on. Press & hold the [Wi-Fi] button on the top of the printer until the alarm lamp flashes once.
Make sure that the lamp next to this button starts to flash blue and then go to your access point and press the [WPS] button within 2 minutes.

How do I connect my Canon wireless printer to my laptop?

Press and hold the Wi-Fi button on the printer-top till the lamp flashes once. Step 2: The lamp next to the WiFi button also flashes blue. After this, go to the access point and press the WPS button within two minutes. As the connection between laptop and printer appears, flashing of Wi-Fi lamps and power will stop.

How do I connect my Canon printer to my phone without Wi-Fi?

You will have to make sure that the printer you are using features a Bluetooth receiver. After you have confirmed the existence of Bluetooth, activate the Bluetooth connection. Head into your phone and pair the device with your best wireless printer for home using the Bluetooth section of the settings app.

How do I print from my Canon to a USB?

Print from a USB flash drive

Turn the machine ON.
Load A4, Letter, or Legal-sized plain paper in the tray.
Insert the USB flash drive into the USB port.
Select the document you want to print.
Specify the settings as necessary.
Press the Color button for color, or the Black button for black & white to begin printing.

Can I connect a wireless printer with a USB cable?

Note: The printer can be connected by a USB cable to a computer and also be connected to a wireless network. Both USB and wireless connections can be active and used at the same time.

How do I get my computer to recognize a USB printer?

Remove any devices connected between the printer and computer (IE:USB Hub). Reseat the USB cable connecting the printer and computer by unplugging both ends, and plugging them back in. Check for a “Found New Hardware” Windows pop up installer.

How do I install a Canon wireless printer without a USB cable?

Can you setup a wireless printer without a USB cable?

Wireless. As the name implies, a wireless printer doesn’t need to be plugged into anything other than a power source to operate properly. Communication between the printer and the computer or network is established through either a Bluetooth or Wi-Fi connection.

How to connect Pixma mg3620 to WiFi?

Press and hold the wifi button on your printer until the ON light flashes.

Then,in order to print the information regarding the wireless connection setup including the PIN Code,Press the wifi button.

Then press the Stop button and hold it until the alarm light flashes for 16 times.

How to connect mg3620 to laptop?

Press the Wi-Fi button to start it and wait for the light to flash.

After that,press the Start button (black button) and then press the Wi-Fi button

Make sure that the Wi-Fi light flashes fast and the light indicating ON status is also lit.

When the Wi-Fi light is flashing continuously,approach your wireless router.

How to set up canon Pixma mg3620?

Launch the installation file from your CD ROM or that you’ve downloaded from our webset,and follow the on-screen prompts.

At the Connection Method Selection screen,choose USB Connection.

Follow the of the on-screen instructions.

When the Printer Connection screen appears,connect the USB cable between the printer and the computer.

How to connect Canon mg3520 printer to WiFi?

Quit all running applications.

Log on to your computer as an administrator.

Insert the setup CD or download the installation file.

Double-click on Run Msetup4.exe on the AutoPlay screen,then select Yes or Continue .

Select Change Connection Method .The setup instructions for a printer connection display.