How do I override my Brother toner cartridge?

To enable or disable Continue Mode, follow the steps below:

Table of Contents

Press the Up or Down arrow key to choose General Setup, and then press OK.
Press the Up or Down arrow key to choose Replace Toner, and then press OK.
Press the Up or Down arrow key to choose Continue or Stop. Press Go.

How do you reset the toner on a Brother HL 3170cdw?

The Solution:

Open the top lid of the printer and leave ajar.
Press and hold the “Secure” and “X Cancel” buttons.
Use the arrow keys to select the cartridge model you would like to reset and press “OK”.
Press the UP arrow to reset the cartridge.
Once reset is selected you will see “ACCEPTED” on the screen.

How do I reset my Brother printer after replacing waste toner box?

To clear the message ‘Replace WT Box’ from the LCD display, power off the printer using the power switch on the right side of the printer. Wait 5 seconds and then power the printer back on.

Can you still print if toner is low?

You do NOT have to install a new toner cartridge and you can still print when the TONER LOW message appears, but it is a good idea to have a new genuine Brother toner cartridge on hand for when the toner does reach its end of life.

How do I get rid of replace toner message?

Open the front cover of the printer.
Press the Clear / Back button.
Press the * button.
Press the 0 button.
Press the 0 button.
Close the front cover.
This will clear the ‘Toner Low’ error and allow for continuous printing.

How do you reset the toner on a Brother HL 3170CDW?

How do you reset the waste toner box on a Brother HL 3170CDW?

Your Brother HL-3170CDW printer has a self-cleaning mechanism that cleans the drive belt, also known as the waste box. Open the front cover then close it and you will hear a whirring sound. After the whirring sound, close the cover for a few seconds then open the front cover again.

Can you reuse a Brother waste toner box?

DO NOT reuse the waste toner box. Unpack the new waste toner box and install the new waste toner box in the machine. Make sure the waste toner box is level and fits firmly into place. To avoid print quality problems, DO NOT touch the shaded parts shown in the illustrations.

Can I empty the waste toner box?

Your toner waste container shouldn’t end up in the trash, instead you can empty and reuse it. Empty the toner waste container yourself in four easy steps: Release the waste container, which is located in the inside front cover under the toner cartridges. Pull out at a 45-degree angle with a garbage bag in hand.