How many LED lights can I put on a 12V battery?
You have a 12 V supply and each LED might need up to 3.5 V. (12 V)/(3.5 V) = 3.4 LEDs max. Since you can only have whole LEDs, the answer is 3.
Can you run LED lights off a 12V battery?
Answering your question: you can’t use a 12v battery to power a 12v led strip directly. a fully charged lead acid will have 13.8v which will burn out your led strip if you are doing so. You don’t need a current limited device. What you need is a voltage regulator.
How long will LED lights last on a 12 volt battery?
A very small user of power is a 1.2 watt LED light running on a 12 volt power source will use 1.2W / 12V = 0.1 amps. Therefore a 100ah (amp hour) battery will last for 1000 hours.
What resistor do I need for 12V LED?
Resistor = (Battery Voltage – LED voltage) / desired LED current. So assuming a 12-volt power source and a white LED with the desired current of 10 mA; The formula becomes Resistor = (12-3.4)/. 010 which is 860 ohms. Since this is not a standard value I would use an 820-ohm resistor.
Will LED lights drain car battery?
Well, you have nothing to worry about. LED headlights barely use much power while running. In fact, most draw an average of 20 Watts per headlight bulb. With this power draw, even IF you leave your LED headlights on the whole night, they will not drain your battery as halogen headlights would have.
What happens if you Overvolt LED?
Simply put, too much voltage kills the LED. As previously mentioned, LED is current-driven and not a voltage-driven device. Therefore, if the voltage deviates more than 10%, the LED bulb is fused off. Subsequently, the electronic parts inside the LED bulb get damaged from the voltage spike.
Does it matter which side of the LED you put the resistor?
Placing the resistor on the positive (anode) side of the resistor will have no differing effects from placing the resistor on the negative (cathode) side of the LED. So don’t sweat it, just pick a side!