How do I reset my Mercedes Sprinter radio?
Turn the ignition key to the on (not start) position. Press the gas pedal to the floor and hold for five seconds. Turn the key to the “off” position (don’t remove the key), then release the gas pedal. Wait at least two minutes for ECU to reset .
Does Mercedes Sprinter have aux?
On the back you will see an empty slot that allows you to plug in the aux cable. There’s really no way to get it wrong, just make sure to plug it in the position furthest to the side of the radio. In order to activate the aux connection, you will have to change a setting on your radio.
What size are Mercedes Sprinter speakers?
Mercedes Benz Sprinter Front Door speakers Alpine 17cm 6.5″ car speaker kit 220W.
How do you scan a radio station on a Mercedes?
To go to Station scan mode, just select the radio band ie FM or AM. ……Registered
- Have the radio source selected.
- Pull the control knob down (towards rear of vehicle) to show the lower menu options.
- Move to menu labelled “Presets”
- Press on the first option (top of list) …this will toggle to scan mode.
Can I upgrade my Mercedes radio?
Aftermarket Navigation Player For Mercedes-Benz A/C/CLK/E/G/M/ML/SLK/S/Vaneo/Viano/Vito is specially designed to replace Mercedes-Benz standard radio system or navigation unit. It has the same harness and plug as original radio, totally plug and play when install.
How do I unlock my Mercedes radio without the code?
To reset your Mercedes-Benz radio code, you will need to retrieve a corresponding radio code. To do this, either check your owner’s manual or contact an authorized Mercedes-Benz dealership with your VIN and proof of ownership. From there, enter the code into your radio, and it should successfully be reset.
Where is the aux on a Sprinter van?
Where is the aux cord in Mercedes?
In Mercedes-Benz E-Class you will find AUX input in the glove box compartment. Look carefully it is housed in a groove just behind the glove door box door in the front.
How do I connect my phone to my Bluetooth MB?
To pair a phone to Bluetooth®, the phone must be on. Press the “Connect Device” option on your Mercedes-Benz color display. Then, push the “Search for Phones” option on the color display. The name of your device should appear on the color display once Bluetooth® recognizes it.
Can you put a aftermarket radio in a Mercedes-Benz?
Mercedes MOST Fiber Optic Amp Interface The MOST Fiber Optic Amp Interface allows the Mercedes Harmon Kardon factory amplifier, the output from all speakers including subwoofer, and premium sound quality to be retained when installing ANY aftermarket radio. This makes for a nice clean easy install.
Why has my radio stopped working in my Mercedes?
If it isn’t just the radio that isn’t turning on the culprit may be a dead battery. Get some jumper cables and see if you can jump your car. However, if your car turns on but there isn’t any sound coming from the radio, it could also be: Bad speaker wires.
How do I find the radio code on my sprinter?
Just enter the last 8 digits of your Sprinters VIN into the grey window of the downloadable decoder spread sheet and then press enter – if the radio code is known against the VIN number it will be displayed in the yellow window. If ‘N/A’ is displayed then its not your lucky day, sorry!
How does the audio 15 work in the sprinter?
The Audio 15 unit that came stock in our Sprinter has an interface from the early nineties. To move between audio sources involves tons of button pushes. Because we’re used to phones and tablets we kept trying to touch the screen to make changes. The unit has no real output power and super-cheap stock speakers.
How do you remove the dash on a sprinter Sprinter?
Trim removal tools to remove door panel and dash components. Wire stripper and crimper. Fish tape to pull cables through the dash and headliner. The Sprinter’s dash goes together in layers. You just have to know where to start peeling things away. Each layer reveals the fasteners for the layer behind it.