What does E 3 mean on the contour next meter?
An E3 Error Code means the meter is sensing that blood has already been applied to. the test strip (or the strip has already been used). What to do: Please make sure you see the flashing blood drop on the display before. adding the blood sample. Ensure that you are using a clean, new strip each time you.
Why does my true Metrix keep saying E 3?
This means that the test strip has been used, that it has remained out of the vial too long, or the sample may have been applied to the TOP of the test strip. Retest with a new test strip. Be sure to touch the sample tip of the test strip to the blood drop and allow the blood to be drawn into the strip.
What does EO mean on glucometer?
“E-1” in the display means the test strip may be damaged or the code key is incorrect. Remove and reinsert the test strip. If the message reappears, turn off the meter and make sure the code key is properly inserted. If the message reappears, please contact Accu-Chek Customer Care.
What is E in Accu-Chek?
“EEE” in the display means an electronic error occurred. Turn the meter off and on or take the battery out for a few seconds and reinsert it. If the problem persists, please contact Accu-Chek Customer Care.
What does E13 mean on a glucose meter?
Q: What does E13 mean? A: Not enough blood was added to the test strip. Retest with a new test strip.
What does Er4 mean on relion?
Message: Er4 The test strip may be wet. The Test strip may have been removed too soon. You applied more blood after testing began.
What does E 5 Mean on a true Metrix meter?
“E-5” in the display means the code key is incorrect or your test strips have expired. Make sure the time and date in the meter are correct.
What does e5 mean on a glucose meter?
“E-5” in the display means the code key is incorrect or your test strips have expired. Make sure the time and date in the meter are correct. If the problem persists, please contact Accu-Chek Customer Care. Accu-Chek Aviva Meter.
What is code 333 in Accu-Chek?
This is a software function which was programmed. It is not possible to change this software function – that’s why the meter still says code 333 when it is turned on. Do the old Accu-Chek Active meters still need an activation chip?
What does E4 mean on a glucose meter?
an incorrect test strip
An “E4” code indicates that an incorrect test strip was used. The CONTOUR®NEXT EZ meter can only be used with CONTOUR®NEXT Blood Glucose Test Strips and is NOT COMPATIBLE with the CONTOUR® Test Strips. To correct, repeat test with a CONTOUR®NEXT test strip. If error persists, call Customer Service at 1-800-348-8100.
What is Er4 one touch?
The OneTouch Verio® Meter displays messages when there are problems with the test strip, with the meter or when your glucose levels are above 600 mg/dL or below 20 mg/dL.
What means E5?
E5 fuel, a mixture of 5% ethanol and 95% gasoline.
What does E04 mean on my glucose meter?
an incorrect test strip was
An “E04” code indicates that an incorrect test strip was used. The CONTOUR®NEXT Meter can only be used with CONTOUR®NEXT Blood Glucose test strips and is NOT COMPATIBLE with the CONTOUR® test strips. To correct, repeat test with CONTOUR®NEXT test strip. If error persists, call Customer Service at 1-800-348-8100.
What is E 5 on Accu Chek?
“E-5” in the display means the code key is incorrect or your test strips have expired. Make sure the time and date in the meter are correct. If the problem persists, please contact Accu-Chek Customer Care.
What is code 333 in Accu Chek?
What does E5 mean on a true result meter?
What is e5 on Accu-Chek?
What does e5 mean on a true result meter?
What does error 4 mean on a one touch?
Error 4. What it means: One of the following may apply: Not enough blood or control solution was applied or more was added after the meter began to count down. The test strip may have been damaged or moved during testing.
How do you fix a glucometer error?
Solution: You have to replace or charge the batteries soon. Invalid code strip insertion. E.g. get wrong test strip, defective test strip.
What is error 5 on the Omron?
E5 error: Clothing is interfering with the arm cuff. Remove any clothing interfering with the arm cuff.
What is error 5 in one touch glucometer?
CAUTION: You may get an ERROR 5 message or an inaccurate result if the blood sample does not fill the confirmation window completely. See Troubleshooting in Section E. Discard the test strip and re-start the test process.
What does E2 mean on contour?
INSUFFICIENT BLOOD DROP
An “E2” code indicates INSUFFICIENT BLOOD DROP or that the test strip has not filled enough for an accurate test. Another possible cause is difficulty seeing where to apply blood to strip. To correct, remove the test strip and retest using a new test strip.
What does e9 mean on my Accu Chek?
the battery is almost out of power
“E-9” in the display means the battery is almost out of power. Change the battery now. If the message reappears after the battery has been replaced, reset the meter. To reset the meter, remove the battery, press any meter button, then reinsert the battery.
What does an E3 error code mean on my meter?
An E3 Error Code means the meter is sensing that blood has already been applied to. the test strip (or the strip has already been used). What to do: Please make sure you see the flashing blood drop on the display before.
What does E-3 mean on Accu-Chek?
What does the error E-3 mean? | Accu-Chek What does the error E-3 mean? “E-3” in the display means your blood glucose may be extremely high or a meter or a test strip error has occurred. The following instructions should help you understand what action to take:
What should I do if I have an E-3 code for glucose?
If the E-3 code still appears for your blood glucose test, your blood glucose result may be extremely high and above the system’s reading range. Contact your healthcare professional immediately. If the second test result does not match how you feel, perform a control test with the control solution and a new test strip.