Do curtain rings come in different sizes?
Choose a drapery ring with an inside diameter ½ inch larger than the diameter of the pole or rod. For example, if you have a 1-inch diameter rod, the appropriate ring will have an inside diameter of 1 ½ inches. A ring with a smaller inside diameter will make it difficult to move the drapery along the rod.
How many inches do curtain rings add?
Most clip-on rings add approximately 1, 1 1/2 or 2 inches to the length of the drapes, depending on the size of the rings.
Can you add rings to any curtain?
Ring Clips You can use this method to hang any type of drapery panel, since you simply clip the ring to the panel. If you want a little bit more length out of your panel, ring clips are a great way to add 1-2 inches, since the clips means the fabric hangs just below the drapery rod.
What is a standard eyelet size?
The diameter of the inside of an eyelet ring (or grommet) is normally 40mm. The ideal diameter of a metal curtain pole for eyelets is 28mm.
How do you hide rings in curtains?
HERE’S THE QUICK TIP ON HOW TO HIDE CURTAIN RING CLIPS: just pinch the back of the curtains and clip the rings an inch or so down from the top.
How do I work out how many curtain rings I need?
To calculate how many you need, divide the length of the curtain rod in inches by the spacing you want. If you want rings every 5 inches on a 10-foot curtain rod, you’ll divide 120 by 5 to get 24, which means you’ll need about 24 rings total.
How do I choose eyelet size?
Eyelet and grommet dimensions are generally measured in thousandths of inches (3 decimal places). Therefore, it is advisable to use precise measurement tools to determine Stimpson part dimensions. We recommend a caliper for all dimensions except I.D. and hole size, which should be measured using pin gauges.
What is the smallest eyelet size?
Grommet and Eyelet Sizing Chart
| Size | Outside Diameter (in millimeters) | Inside Diameter (in millimeters) |
|---|---|---|
| #0 (1/4″) | 11.5mm | 6mm |
| #1 (5/16″) | 17.5mm | 7mm |
| #2 (3/8″) | 19mm | 9mm |
| #3 (7/16″) | 22mm | 12mm |
Do curtain rings have to match Rod?
It depends. If you can see all the windows at the same time, then yes. You might even need the same drapery between rooms if your home is very open concept-like. The more obvious separation there is between rooms, though, the less you need to be concerned with coordinating rods between them.
Should living room curtains go to the floor?
So should curtains touch the floor? The short answer is yes… usually. But when making any decision about your window treatments, whether they’re drapes, blinds, or shades, it’s important to consider every aspect of style and function so you can choose the best option for your windows and your home.
How many curtain rings do you need per curtain?
Calculating Curtain Ring Needs One ring goes at each pleat to hang the panels securely. For flat panels, you usually need one ring for every 4 to 8 inches of curtain rod length. Heavier drapes need more rings that are closer together, while lightweight fabrics are usually fine with rings every 7 or 8 inches.
Is a grommet the same as an eyelet?
There are slight differences in the two, an eyelet is comprised of two rings of metal that have small prongs that when applied together with forced, form a strong bond with one another. A grommet is very similar. Grommets are typically used for more heavy duty materials and usually are bigger in size.
How full should eyelet curtains be?
Heading Styles and Curtain Fullness – An eyelet curtain will usually have 2 x fullness = 100% of the track width. – A pinch pleat curtain requires more fabric to sew in the pleats as it gathers up tighter. As such you will require 2.5x the track width or 150% fullness.
How many rings do you need for curtains?