How do I change the code on my Kwikset door lock?

Posted on

How do I change the code on my Kwikset door lock?

It is recommended that you change it to a code of your own.

  1. Make sure the lock is unlocked and the door is open.
  2. Enter your Programming Code – for new installation, default is 0-0-0-0.
  3. Press enter arrow. You will hear one beep.
  4. Press 4 .
  5. Press enter arrow. You will hear one beep.
  6. Enter a new Programming Code.

What is the master code for Kwikset?

The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.

What is Kwikset programming code?

1) A programming code enables you to make changes without needing to access the programming button. This is ideal for landlords to allow programming from the outside, without access to the interior program button.

How many times can you rekey a Kwikset SmartKey?

How many times can I re-key my lock? Unlimited amount of times. All you need is the Smarkey Security tool.

How do you reset lock code when locked?

Take these steps to reset your lock:

  1. Pull up the shackle to open the lock.
  2. Rotate the shackle 90° counterclockwise and press all the way down.
  3. Hold down the shackle and set your own combination by turning dials.
  4. Turn the shackle back as normal. The setting is now complete.

How do I change my Kwikset lock code?

How do I add/delete a user code on my SmartCode 955?

  1. Make sure the door is open. Press and release the program button using the SmartKey tool or a paper clip. You will hear two beeps.
  2. Press 1. You will hear one short beep and the keypad will flash green once.
  3. Press the Kwikset button4) Enter a user code.

Can Kwikset SmartKey locks be picked?

Even one of Kwikset’s most vocal critics, Marc Weber Tobias (more on him in just a bit), told us that the SmartKey lock is virtually impossible to pick. Other videos criticizing Kwikset point out that the lock can be easily compromised using a specialized bypass tool used by locksmiths.

How do I reset my Kwikset lock code 264?

Press and hold the Reset button for 5 seconds, until you hear 3 beeps and see the Kwikset button flash amber 3 times. 2. Enter the default PC (O-O-O-0).

Can you master key a Kwikset SmartKey?

Thanks to the two-cylinder Key Control Deadbolt with SmartKey Security, you can have one master key for all your units and unique keys for all of your tenants.

Is Kwikset SmartKey bump proof?

Bump Proof, Pick Resistant and Re-key Technology SmartKey Security provides superior protection against break-in techniques because of its patented technology that isn’t found in traditional pin-and-tumbler locks.

How to rekey and reset a Kwikset SmartKey?

With the Kwikset Smart Key, you can rekey your locks, even without a good key, right in the door, in just 15 seconds.If rekeying the lock while still on the

How to reset Kwikset key?

Remove the batteries.

  • Press and hold the lock button on the keypad.
  • Place the batteries back in (while still holding the button)
  • The lock will beep three times over the course of 15 seconds or so. After the 3rd beep release the button.

    • How to remove Kwikset double cylinder deadbolt lock?

    Flat-head screwdriver

  • Plug-removal tool
  • Plug follower

    • How to rekey a Kwikset doorlock or deadbolt?

    The Kwikset Smart Key design uses wafers to interact with a sidebar. This design protects lockpicking and key bumping.

  • The ability to rekey a Smart Key Lock without disassembly is a major convenience.
  • You can accomplish rekeying without the need for a locksmith