Are water heater elements Universal?
There are three types: screw in, bolt in and clamp in. They all have different wattage ratings and can work on either 120 or 240 voltage. Check your state and local codes before starting any project.
Can a dip tube be replaced?
New water heaters have dip tubes that’ll last as long as the water heater. Or second, replace the defective dip tube with a cross-linked polyethylene one and flush the debris out of the water heater and the screens and filters. You may have to flush the system more than once.
Who makes AO Smith gas water heaters?
Smith Water Products Company is headquartered in Ashland City, Tennessee, home of the world’s largest water heater factory. The A. O. Smith network includes five manufacturing facilities in North America, plus plants in Nanjing, China and Veldhoven, The Netherlands.
How long is AO Smith warranty?
between 6 and 12 years
Most AO Smith warranties range between 6 and 12 years, usually closer to ten. This means that the manufacturers fully expect your water heater to last at least a decade, and possibly twice that even after it goes out of warranty.
How do I know which heating element I need?
How do I determine which type of water heater element I need?
- Examine your existing element.
- You will need to find out the voltage and the wattage.
- Compare and match your results of volts and watts to the volts and watts columns below.
- Choose the volts that match your voltage 120 or 240.
How often do dip tubes break?
Dip tubes are generally good for at least 15 years. After that, they get brittle from constant immersion in hot water.
Will a water heater work without a dip tube?
In residential gas and electric water heaters, one important part you’ll hear about is a dip tube. It may not sound like the smartest piece of plumbing, but it’s a fact that your hot water won’t work well or last long without it.
What is the life expectancy of an AO Smith water heater?
Smith tank water heaters have a limited warranty lasting between 6 to 10 years, it is not uncommon to find water heaters that are still properly functioning well over a decade or more. When properly installed and maintained in locations with good water quality and pressure, A. O.
What causes a dip tube to break?
By directing cold water to the bottom of the tank, the incoming cold water pushes the heated water out in front of it. This allows the hot water to be used without diluting the temperature of the hot water that occupies three-fourths of the tank. heater has caused the dip tube to break off.
How much does it cost to replace a dip tube?
Dip Tube – $10 to $150 The dip tube carries cold water to the bottom of the tank for heating. If the dip tube is corroded, blocked, or leaking, water heating won’t occur as efficiently. On average, a new dip tube costs about $10, and it can run up to $150 to have it repaired professionally.
What brands does AO Smith make?
A. O. Smith Brands
- A. O. Smith Water Products.
- American Water Heaters.
- Aquasana Inc.
- Atlantic Filter.
- Clean Water Testing.
- Clear Reflections.
- CustomCare.
- Evolve.