How do I clean my laptop CPU fan?
Unplug the Laptop
- Unplug the Laptop.
- Unplug your laptop from any power source and place it upside-down, preferably on an anti-static mat.
- Remove the Bottom Panel.
- Remove the bottom panel of your laptop.
- Hold the Fan in Place.
- Hold the fan in place with your finger, so that it does not rotate.
- Clean the Fan with a Cloth.
How do you get dust out of a CPU fan?
After disconnecting the fan from the computer, hold the fins of the fan in place using your fingers. Then, either blow the dust away using compressed air, suck up the dust with an electronic vacuum, or wipe away the dust with a damp cloth.
Is cleaning CPU fans safe?
For a CPU fan that is gunked up with dirt and dust, you may use a cotton swab soaked in isopropyl alcohol. The alcohol effectively removes the sticky gunk that has collected on the fan blades. After cleaning, give the fans a quick spin to make sure that the blades are moving freely.
How do I clean under my CPU fan?
You can either just wipe the base and the CPU clean with a dry, lint-free tissue or, for more thorough cleaning, use a lint-free tissue moistened with either a mild solution of washing-up liquid or isopropyl alcohol. Do not put the cooler or CPU under running water.
How do I clean the dust out of my CPU?
Use a lint-free cloth or can of compressed air to clean the dust from any dust filters, as well as any obvious collections in the base of the case. Use a can of compressed air—we don’t recommend trying to blow forcefully yourself—to clean the dust from any heatsinks like your CPU or graphics card cooler.
How often should you clean laptop fan?
It is important that you clean out laptop fans at least once a year to prevent overheating. If you don’t want to risk ruining your fans by removing them, use the compressed air method that we discussed above to gently remove dust every 6 months. Tip: You can purchase a dust filter to keep your computer fans clean.
What is the easiest way to clean fans?
- Turn your fan off and unplug it from the wall. Before cleaning, turn the fan off and unplug it.
- Remove the grate from your fan.
- Vacuum the grate.
- Wipe down the grate with a damp cloth and dish soap or an all-purpose cleaner.
- Wipe down your fan blades.
- Dry the fan blades completely.
- Reattach the fan grate.
How do you clean a CPU fan without compressed air?
4 Methods to Clean PC Dust Without Compressed Air
- 1 #1 Take out the heatsink and clean it with brush.
- 2 #2 Silicone blower can be a cheap alternative.
- 3 #3 You can use your vacuum cleaner as a blower.
- 4 #4 Or borrow your sister’s hairdryer.
Can I vacuum my laptop?
Vacuum cleaners are not recommended: they’re quite ineffective at removing dust from laptops and they can also cause a build-up of static electricity which you don’t want around a laptop. Obviously make sure the laptop is powered off before you start, and remove the battery if possible.
Is laptop fan cleaning necessary?
How do I clean a fan without opening it?
You could try laying the fan outside on the ground and putting a dinner plate over the motor area. Then spray the fan with a cleaner like 409 or Clorox. Let it soak a few minutes to loosen up the grime. Then using the jet setting on your hose, blast it clean.
How do you clean a fan without dismantling it?
How do I clean a fan that doesn’t come apart? For fans with unremovable grates, compressed air is the best solution. Spray the air onto the grate and the blades to quickly clean off the dust.
Is it OK to clean my PC with a hair dryer?
No, just no. Don’t do that. Go get some compressed air like a civilized person. Every other possible thing aside, the broad expanse of air that comes out of a hair dryer compared to a can of compressed air is just going to move stuff around a bit more than a fan would.
How do you clean CPU dust?
How do you get dust out of a fan?
Use a hairdryer or compressed air to blow away dust from the surface of the blades. Use the coolest air setting on the hairdryer and keep it about six to ten inches away from the blades. Be sure to turn the fan around to clean the backside of the blades in the same manner.