Why is my dogtra not working?
Make sure your battery is charged in both the collar and the transmitter. Low battery charge can make for inconsistent functioning. Make sure both pieces are turned on and that the unit is properly synced so that the collar is receiving a signal from the transmitter.
How do I reset my dogtra collar?
Hold the two red dots together for about 5 seconds or more. Release them when the green LED blinks rapidly on the receiver/collar.
Why is the shock collar not working?
Check that the battery on the receiver collar is fully charged and replace it as needed. Verify that the transmitter has power, is on, and it’s functioning. If you have a handheld transmitter then also check it’s battery and replace it if needed. Next, confirm that the transmitter and collar are properly synced.
Why does my dogtra collar say offline?
Make sure all devices are turned on and paired correctly. Make sure that all batteries are fully charged. Make sure that the LED indicator lights and the app show that everything is fully charged. Your tolerance may be higher than your dog’s tolerance.
Why is my bark collar not working?
The bark collar has not been fitted properly (very common) If the battery is flat, you simply need to recharge or replace the battery. However, if the battery appeared to flatten too quickly we may need to look at things more closely. Often times a flat battery can relate to the most common problem.
Why is my sport dog shock collar not working?
Check to see if the Collar Receiver has been turned on. Make sure the collar and transmitter are programmed to work with each other. Check the batteries. Replace/recharge the batteries.
How long do dogtra batteries last?
The batteries in the units have an average standby life of 34-hours. With moderate nick, constant or pager use, battery life will decrease to approximately 20 hours. If the unit will be stored unused for an extended period of time, we recommend fully charging the batteries every 2 months to maintain the batteries.
How long do dogtra collars last?
With normal use you can expect 2 or 3 days of run time from a full charge. Turning the e-collar off when not in use, a full charge can last over a week.
Why is my dog not responding to the e-collar?
Increase the Stimulation Range. Refer to “Changing Stimulation Ranges” for more information. Make sure the Collar Receiver’s Contact Points are placed snugly against your dog’s skin. You may need to switch to the longer Contact Points included with your system or trim the hair beneath the Contact Points.
How do I reset my e collar transmitter?
Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. You may need to hold both units 2-3 feet from each other before this occurs. Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been reset and will begin flashing as normal.
How do you pair a dogtra handsfree?
Hold down the HANDSFREE Remote Controller button until the rapidly flashing light on the transmitter and controller both show a solid light. 5. Release all buttons. The HANDSFREE Remote Controller should now be coded.
Can you replace the battery in dogtra collar?
Battery replacements are necessary to ensure proper performance of Dogtra collars. Below is a guide on which batteries to get.
How long does dogtra battery last?
Can you overcharge an e-collar?
The rechargeable Lithium Ion (Li-Ion) batteries are not memory sensitive, do not require depletion before charging and cannot be over charged.
Should dog wear e-collar all day?
Accidents happen and pets get lost, which is why it’s advisable to keep your dog’s collar on whenever possible, especially when you’re walking him on a leash, moving households, or traveling.