How do I set up DStv extra view?
On your remote, click the “Help” button and scroll to the “General Information” option. Click on it and select the “Extra View” option. If your connection is correct and activated, it will be displayed here. This is the simple answer to how do I activate DStv extra view.
How do I connect my DStv decoder to my extra TV?
The two F-type connectors should be connected to the end of the coaxial cable. Measure the cable to ensure it reaches the second tv comfortably. Connect one side of your F-type connector to a port labeled RF Out at the back of your decoder. You can now connect the other end of the cable to your TV.
What is RF in and RF OUT on DStv decoder?
RF In: Used for Extraview TV link connection. 5. RF Out: Used for Extraview TV link connection. 6. Unicable In: Satellite input to the DStv Explora.
How do I connect DStv extra view with diplexer?
DStv Explora and 5S extra view Setup.
- Install a Smart LNB model LMX500/501/502 on your dish.
- Next, Install a diplexer behind the Explora 1 to sort out the heartbeat.
- Connect the Explora 1 to port A on the SLNB and the 5S decoders to ports B or C.
- You’ll only be using two of the Unicable ports on the SLNB.
How does XtraView on DStv work?
XtraView is a way to keep the whole family happy. With XtraView, you can link either two or three decoders together under ONE subscription (and only pay a monthly Access Fee for the other decoders). When linking two decoders, you will pay your normal monthly subscription plus ONE Access Fee.
How does DStv switch 5 2 work?
The DStv Switch (5-2) has: – Four inputs (labelled H/L, V/L, H/H, V/H); – Four normal multiswitch outputs (labelled 1 to 4); and – Two Explora outputs (labelled A and B). Each multiswitch output (labelled 1 to 4) outputs a signal equivalent to a normal multiswitch output or a single LNB output.
What is the difference between RF in and RF OUT?
(Radio Frequency in) Refers to coaxial sockets on the back of older TVs, VCRs and DVDs that accepted analog video signals. The “RF in” socket is typically receiving VHF/UHF signals from an antenna. Contrast with RF out. See F connector and RF.
What does RF OUT stand for?
Radio Frequency out
(Radio Frequency out) Refers to coaxial sockets on the back of set-top boxes, VCRs and DVDs that output analog video signals for older TVs that do not have composite video or component video inputs.
How do I connect multiple decoders to my smart LNB?
What you need in how to connect two decoders. You can either use a signal splitter on your satellite or install a twin LNB. It is just like the regular smart LNB but offers more ports to connect the RG6 cable. When using a signal splitter, you should connect it to the smart LNB on your satellite.
How do I check my heartbeat on Xtraview?
Click on the menu button on your remote and navigate to the extra view option. Select it, and it will bring you a list of all connected decoders in the setup. You can now select the individual decoder you want to test. Once you click on it, you will get all the signal information about it.
Why is my secondary decoder showing no signal?
Why your DStv says no signal? The reason your DStv says no signal is because there is an error in the DStv installation. This is caused by either a misaligned satellite dish, a faulty LNB, an improperly connected F-connector plug, loose cables or incorrect decoder settings on the LNB type.
What does RF in and RF out mean on DStv decoder?
How do you connect RF and RF out?
More videos on YouTube
- Connect the two F Type connectors to the ends of the coaxial cable.
- Connect the F Type Female plug to TV PAL Male Coaxial RF connector to one side of the already inserted F Type connector.
- Connect one side of the F type connector to the port labeled as RF OUT port on the GOtv decoder.
What is the difference between smart LNB and normal LNB?
where customers make use of their own satellite dish). From a technical viewpoint, the DStv Smart LNB combines the features of a DStv Switch into a single UniCable LNB and offers a single cable solution for distribution of multiple satellite signals.
What is a DStv Xtraview 3 decoders setup diagram?
A DStv xtraview 3 decoders setup diagram is a guide that takes you through the entire process when you want to connect three decoders in an extra view setting. A setup diagram will make it easier by pointing out all the items you need in the setup.
How do I Activate my DStv Extra view?
You can easily check the extra view status of a decoder by doing the following steps: Press the “ Help ” button on the remote control. Scroll to “ General Information “. Then go to “ Extra View “. If everything is working fine then call Multichoice on 011 289 2222 (South Africa only) to activate your DStv extra view.
What should I do Before I activate the Xtraview option?
Before you activate the xtraview option in your decoder, you should ensure all the connections have been made properly. Check the wire connection between your primary and secondary decoders and ensure they are firmly in place.
What equipment do I need to install Xtraview?
The recommended installation for most XtraView installations is a DStv Smart LNB together with an 80cm satellite dish. When linking decoders in XtraView, you cannot have different packages on the different decoders.