What should you do when a pedestrian walks in the path of your forklift?
Slow down, stop and sound horn at intersections and wherever your vision is obstructed. Forklift operators should always be aware of conditions in their workplace, including pedestrian traffic. Forklift traffic should be separated from other workers and pedestrians where possible. Yield right of way to pedestrians.
When a pedestrian encounters a forklift the right of way goes to?
Operators should yield the right of way to pedestrians: This is an OSHA recommendation that all forklift drivers should be aware of. Because of the size and power of the forklift, operators should stop and wait for pedestrians to clear the area before proceeding along their route with caution.
Which safety precaution applies to forklifts?
Keep your arms, legs, head, and feet inside the forklift when driving. Never drive with the forks up, and never use the forklift to push other vehicles. Never pass a forklift going in the same direction, especially at blind spots, intersections, or other dangerous areas.
How should an unattended forklift be left?
Whenever the forklift is unattended, the mast should be tilted, so the forks are parallel to the ground and the forks should be flat on the surface of the ground. No part of the forks should be off the ground.
What should you do if a pedestrian walks under your elevated load?
18 What should you do if a pedestrian walks under your elevated load? d. Stop moving and ask the pedestrian to move immediately.
Which of the following persons is responsible for watching pedestrians while operating a forklift?
As you implement these safety measures, you will find that forklift safety is not just the operator’s responsibility. It also includes pedestrians entering and working in forklift traffic zones.
What are seven hazards in a forklift operating area?
9 Common Forklift Hazards
- Improper Operation and Use.
- Load Hazards.
- Insufficient or Incorrect Maintenance.
- Pedestrians.
- Floor Conditions.
- Overhead Obstructions.
- Unit Refueling.
- Attachments.
When operators leave a forklift unattended it must have the key removed the brakes set the controls neutralized and the forks fully lowered?
When a powered industrial truck is left unattended, load-engaging means shall be fully lowered, controls neutralized and brakes set. Unless the truck is in view and within 25 feet (7.62 m) of the operator, power shall be shut off.
Which of the following defines when a forklift is considered unattended?
OSHA defines a forklift as unattended when the operator is 25-feet or more away, but still in view of the vehicle or when the operator leaves the vehicle and is not in view of it. OSHA requires the operator to perform these actions prior to leaving the forklift: Turn off the engine.
What is the safest position for your forklift when you are carrying a load up a ramp onto a trailer?
Driving Direction on Grades New forklift operators are sometimes curious and ask, “Which direction should the load face when traveling up a ramp?” The answer is, you should always drive a loaded forklift with the forks and load pointed upgrade. This will help prevent the load from sliding off the forks.
How far should a pedestrian be from a forklift?
4 ft.
What Is a Safe Distance Between Forklifts and Pedestrians? Ideally, you should keep a forklift as far away from pedestrians as possible. In areas where pedestrians are present, a minimum distance of 4 ft. is necessary.
What is the most common forklift hazard?
Some of the most common forklift accidents include overturns, struck with a forklift and falls from a forklift. Luckily, all of these forklift hazards are things employees can avoid with some vigilance and preparedness prior to and during operation.
What are the 3 main guards on a forklift?
In the manufacturers instructions. Overhead Guard – • Protects the operator from falling objects. Load Backrest – • Protects the operator and stops the load from hitting the mast. Foot Guard – • Protects the operators feet.
What is the first thing you should do before setting off on a route with your forklift?
Make sure the truck is placed squarely in front of the load. Make sure the forks are at the correct height for lifting the load. Set the direction control to neutral. Never raise or lower the forks unless the forklift is stopped and the brake is set.
What position do you place the forks when parking your forklift?
tilted downward position
Forks should always be in the tilted downward position when parked. The best way to achieve this is for the operator to tilt them forward before lowering them to the ground.
Can you leave keys in a forklift?
Never leave an operating forklift unattended. In fact, leaving keys in an unattended forklift (or, thus, leaving on the ignition of this vehicle) is illegal, and has dire consequences as a safety hazard, even without the actual occurrence of an accident. Know and never exceed the lifting capacity of the forklift.
At what speed should a forklift be operated?
The Material Handling Equipment Distributors Association (MHEDA) recommends a max speed of 8 mph in general and a 3 mph max speed in areas where pedestrians are present.
What should you never do when carrying a load on forklifts?
Forklift operators should never:
- Raise or lower loads while the forklift is moving and especially not while turning because it makes the forklift very unstable.
- Allow anyone to stand underneath or right next to raised forks.
- Carry a load with only one fork as it stresses the carriage.
When setting a load What should you do first?
When setting a load, what should you do first?…Place the tasks for lifting a loaf in their proper order.
- Level the forks and set the forks for proper width.
- Position the load on the forks.
- Lift the load straight up.
- Tilt the load back slightly.
- Back up.
What is the first thing you should do at the beginning of your shift before operating your pit?
PITs must be inspected at the beginning of each shift to ensure they are safe to operate . These inspections may be performed by authorized PIT operators as long as they are trained on how to properly inspect the PIT .
What is a leading cause of forklift accidents?
One of the most common causes of forklift accidents is the behaviour of the person operating the machinery. The type of conduct that can lead to problems can include: Forklift operators failing to communicate with other people working in the same area, meaning they can end up in the wrong place at the wrong time.